Skip to content
HATCHBOX 1.75mm Natural PLA 1 KG Spool

HATCHBOX 1.75mm Natural PLA 1 KG Spool

品牌 HATCHBOX · 3D打印耗材（线材与树脂） · 3D打印

  • 产品: HATCHBOX Natural PLA，1.75 mm 直径，每卷净重 1 kg
  • 直径公差: ±0.03 mm（1.72–1.78 mm），制造商声称，非独立测试批次结果
  • 线材长度: 约 330 m/1 kg（制造商常见问题解答）
  • Shipping package weight: 1,497 g, packaging metadata, not additional filament
  • 打印温度: 喷嘴 180–220°C

未标价

全新
二手、翻新、开箱

商店按固定顺序排列，绝不按价格或佣金排序。 价格仅为快照，请以商店当前价格为准。

摘要

一根适用于日常 FDM 打印的自然色 PLA 线材，喷嘴温度范围为 180–220°C，不需要加热床。购买前请注意颜色和储存方式：“natural”是制造商的颜色名称，而非认证的透明线材，且较旧的 HATCHBOX PLA 线材可能在储存过程中变脆。

优点

  • 适合初学者：180–220°C 温度范围，无需加热床，低翘曲 PLA，适用于开放式打印机。
  • 中性外观：柔和的自然色调，适用于模型、原型和散光部件。
  • 明确的直径规格：宣称 ±0.03 mm 公差用于 1.75 mm 线材。
  • 有文档支持：包括故障排除、储存和床表指南，以及直接联系缺陷卷和 RMA 流程。
  • 用户经验：2020 年 Reddit 用户报告 HATCHBOX PLA 结果一致，包括白色、灰色和黑色线材。
  • 价格：在 HATCHBOX 商店售价 $21.99（SpoolPrices 记录了 2026 年 9 月 4 日至 12 日的六次 $21.99 观察）。

缺点

  • “Natural”不是光学透明；透明度取决于壁数、填充、缝隙和打印参数。
  • PLA 会在远低于其熔化温度下蠕变变形；应避免机械服务和高温环境。
  • 当前没有确切的 Natural 机械或热学数据：HATCHBOX 表示详细的技术资料目前不可用。
  • 老化风险：2018 年款（Transparent Orange）变脆；2020 年款 Translucent Blue 在 Boden 路径中断裂。
  • 床附着性能不可靠；常见问题解答建议在打印无法粘附时使用加热、胶带或胶棍。此外，AMS 和干盒子的卷形规格也不确定，因为 225 g 的空卷重量无法确定当前尺寸，且 HATCHBOX 没有回收或回购计划。

已核实规格

产品HATCHBOX Natural PLA，1.75 mm 直径，每卷净重 1 kg；SKU 3D PLA-1KG1.75-NAT；UPC 191314041022。
直径公差±0.03 mm（1.72–1.78 mm），制造商声称，非独立测试批次结果。
线材长度约 330 m/1 kg（制造商常见问题解答）；空卷约 225 g。
Shipping package weight1,497 g, packaging metadata, not additional filament.
打印温度喷嘴 180–220°C；制造商建议从 180°C 和 40 mm/s 开始。
Bedno heated bed required (product claim); heated bed, painter’s tape or glue stick can help when adhesion is poor.
Cooling100% part cooling fan after the first few layers (general PLA guide).
Density (2016 universal PLA SDS)1.27 g/cm³; melting temperature 155°C; decomposition above 260°C.
FormulationPLA-based biodegradable polymer blend per the 2016 SDS; educational page says NatureWorks Ingeo PLA.
Storagekeep the spool in the original bag with the included desiccant.
Availability“Add to cart” and available:true on the checked product page (2026-10-23).
SafetyCalifornia Proposition 65 warning for Bisphenol S (BPS); maker does not recommend PLA for food contact.
Coverage30-day satisfaction/replacement guarantee; not a one-year component warranty.
完整研究笔记与来源

Printing and bed adhesion

The published profile is a range, not a single certified point: 180–220°C at the nozzle, starting around 180°C at 40 mm/s, with 100% part cooling after the first few layers. The product page says no heated bed is required, while the FAQ separately recommends a heated bed, painter’s tape or glue stick when adhesion is poor. Treat the no-bed claim as a capability statement and tune the first layer and bed surface for your machine.

Color, clarity and heat

“Natural” is the maker’s color name, not a certified clear-filament standard. Whether a print looks translucent or cloudy depends on wall thickness, infill, seams and air gaps, and the company publishes no CIELAB or transmission data. PLA also softens in a hot car or dark enclosure, and HATCHBOX cautions against mechanical service and elevated temperatures. For white lithophanes or color-critical pale parts, the opaque White PLA at $21.99 is a different, non-interchangeable color.

Storage and aging

Keep the spool in its bag with desiccant and away from sun and heat. Owner reports describe older HATCHBOX PLA becoming brittle after years of storage, including 2018 spools of Transparent Orange and a 2020 translucent blue roll that snapped in a Bowden path. A 2023 AMS owner reported older brittle rolls breaking during repeated multicolor load and unload cycles. These are family-level caution signals, not measured failure rates for fresh Natural stock, and moisture, age and storage conditions were not independently diagnosed. If a roll pops or hisses, contact HATCHBOX or the selling shop with order details and photos rather than assuming a manufacturing defect.

Running costs and support

At the posted $21.99/kg, raw material costs $0.02199 per gram: about $2.20 for a 100 g part and $5.50 for a 250 g part, before supports, failures, freight and tax. One spool delivered costs $26.98 including $4.99 shipping, or $0.02698 per gram. Three spools in one qualifying order cost 3 × $21.99 = $65.97 before tax; twelve cost $263.88, or $323.76 if each ships alone with 12 × $4.99 added. Free shipping applies to two or more spools in the continental US. The maker’s 30-day satisfaction guarantee covers dissatisfaction, defects and damage on arrival, with exclusions for abuse, wear, alteration, unauthorized sellers and wrong-item purchases. Ordinary returns require sealed, unused goods within 30 days of purchase; the customer pays return shipping for wrong items or change of mind. An RMA needs the order name, order number and photos of the roll and defective prints. No longer warranty, replacement delivery time or partially consumed defective-spool remedy is documented. Third-party resale claims may need to go to the selling shop.

Which spool this is

This page covers the standard HATCHBOX Natural PLA, 1.75 mm, 1 kg spool, SKU 3D PLA-1KG1.75-NAT, UPC 191314041022, sold on the HATCHBOX 3D US store. “Natural” is the maker’s color name for this SKU and is not the same item as Transparent Orange, colored PLA, clear PETG, PLA MAX, Matte or PLA PRO+. The product page listed it at $21.99 with an Add to cart option on 2026-10-23.

来源

Manufacturer:

Independent reviews and price observations:

Owner reports:

本分类的选购指南

ELEGOO PLA 3D Printer Filament 1.75mm Translucent 1KGeSUN PETG Filament 1.75mmFilaCube PLA 2 1.75mm Black
3D打印耗材（线材与树脂）

2026 年如何选择 3D 打印机耗材

根据成品零件的功能需求选择耗材，再确认打印机能否承受其温度、磨损和柔性要求。标榜“高速”、“丝光”或“碳纤维”的线轴，并不代表打印出的零件更强或能更快成功成型。材料大类、直径、喷嘴兼容性和防潮控制比品牌标签更重要 [1][2][3]。 2026 年 3D 打印机耗材还值得买吗？ 值得，如果你拥有一台 …

阅读指南

相关商品