Skip to content
Flashforge Adventurer 5M Enclosure Kit

Flashforge Adventurer 5M Enclosure Kit

品牌 Flashforge · 3D打印配件与扫描仪 · 3D打印 · 更多 Flashforge 商品

  • Product: DIY enclosure kit for the Flashforge Adventurer 5M (AD5M) 3D printer
  • Noise: manufacturer claims reduction from 65 dB to 55 dB
  • Odor control: contains and reduces odors from materials such as ABS and ASA
  • Safety: protects users, printer components, children and pets from heat and dust
  • Design: modular and upgradeable

未标价

全新
二手、翻新、开箱

商店按固定顺序排列，绝不按价格或佣金排序。 价格仅为快照，请以商店当前价格为准。

摘要

A $39.99 official DIY enclosure for the Flashforge Adventurer 5M: the buyer prints the structural parts and assembles the panels, drag chain and hardware in 26 steps. Check two things before buying: it fits only the Adventurer 5M, and Flashforge’s return policy and warranty exclude accessories.

优点

  • Low official price: Flashforge lists the kit at $39.99 USD and €39.99.
  • Official fit for the Adventurer 5M, with a published 26-step manual.
  • Enables ABS, ASA and PC printing through claimed temperature stability.
  • Modular design with printable parts for personalization.
  • Manufacturer-site owners report good fit and clear instructions.
  • Community printable-model pages reuse the kit geometry.

缺点

  • DIY kit: the buyer must print the structural parts, and print time and filament are not quantified.
  • The 65 dB to 55 dB noise claim has no independent measurement.
  • No assembled dimensions or weight are published, so desk fit is unverifiable from the listing.
  • Accessory exclusion: not returnable and not covered by the printer warranty under Flashforge’s policy.
  • One manufacturer-site owner reported a cracked top cover on arrival.
  • No ventilation or filtration component is documented for the kit.

已核实规格

ProductDIY enclosure kit for the Flashforge Adventurer 5M (AD5M) 3D printer; an accessory, not a standalone printer.
Noisemanufacturer claims reduction from 65 dB to 55 dB.
Odor controlcontains and reduces odors from materials such as ABS and ASA.
Temperature stabilitymaintains consistent internal temperature and supports high-temperature materials including ABS, ASA and PC.
Safetyprotects users, printer components, children and pets from heat and dust.
Designmodular and upgradeable; kit contains all non-3D-printed parts, remaining parts must be printed by the user.
Installation26 documented steps; requires 2.0 mm and 2.5 mm Allen wrenches and a Phillips screwdriver; instant adhesive is used to fix the magnets.
Accessory contents (non-printed)top cover, front door plate, side plate x2, drag chain, drag chain clip, extruder top cover, PTFE tube 91 mm x2, PTFE tube 150 mm, PTFE tube 515 mm, screws ST2.99.5 x11, M38 x7, M46 x20, M325 x2, M320 x2, M316 x1, nut M3 x7, magnet 5*2 x33.
Printed parts (user must print)guard plates A1/A2/B1/B2/C1/C2/D1/D2, hinge x2, spool holder, front door handle, top cover handle, drag chain fixing clip, magnet holder x6, riser A/B/C/D, shielding plate.
Guidanceinstallation manual (A03, 2024-07-10, 36 pages) and a YouTube installation video.
Frame 3D model and OrcaSlicer project file are published by Flashforge for the enclosure build.
Dimensionsnot published for the assembled enclosure; only plate drawings appear in the manual.
Materials and powerplate material is not explicitly stated (acrylic is implied by the DIY drawings but not confirmed); the kit has no electronics and draws no power.
User-supplied items2.0 mm and 2.5 mm Allen wrenches, a Phillips screwdriver and instant adhesive.
完整研究笔记与来源

How the kit goes together

The kit is not a drop-on cover. Installation takes 26 steps and requires disassembling the printer’s front cover, top cover and extruder cable, then re-routing the extruder cable through a drag chain. The box holds the non-printed parts: top cover, front door plate, side plates, drag chain, extruder top cover, PTFE tubes, screws, nuts and magnets. The buyer prints the guard plates, risers, hinges, magnet holders, spool holder, handles and shielding plate from files Flashforge publishes, and fixes the magnets with instant adhesive. Frame 3D models and an OrcaSlicer project file are also published. No spare-parts listing for magnets, screws, plates or handles was found, so a damaged printed part has to be reprinted and a damaged panel replaced out of pocket.

Noise, odor and temperature claims

Flashforge claims a noise reduction from 65 dB to 55 dB, odor isolation for ABS and ASA, temperature stability that supports ABS, ASA and PC, and protection from dust, children and pets. None of these claims have been independently measured in the sources found; the manufacturer’s own product page is the only source. Owner impressions split: one reviewer describes the noise reduction as “a little,” another calls it “great noise reduction,” and one notes a fan whistle became acceptable after installation. Treat the figures as plausible for a partial enclosure with a door and top cover, not as measured results.

Coverage, returns and repair

Flashforge grants a 12-month limited warranty to printers and a 3-month warranty to extruder parts, and states that filaments and accessories are not covered under the return policy; accessories are also listed among parts excluded from warranty. On that basis the enclosure kit, as an accessory, is not eligible for return under the published policy and is not covered by the printer warranty. Only printer returns within 30 days of delivery in original packaging are accepted, with quality issues confirmed by Flashforge support first. Whether any DOA coverage applies to the kit is not stated. Printed parts can be reprinted from Flashforge’s published files, but no spare-hardware listing was found.

Is it worth it?

At the manufacturer’s $39.99 USD and €39.99, the kit is a low-cost official upgrade for an owner who wants the documented fit and accepts DIY assembly. At or below $40 it is good value for that buyer; from $41 to $60 it is fair and should be compared with third-party enclosures that include pre-cut panels and may offer returns; above $60 it is weak unless the official fit and printable-part support are specifically required, because the kit still requires self-printing and offers no coverage for defects. The value case rests on compatibility and the official installation guide; the weak points are the unverified 65 dB to 55 dB claim and the lack of coverage for defects.

Which model this is

This page covers the accessory kit for the Flashforge Adventurer 5M (AD5M), sold as the “AD5M Enclosure DIY Kit” and “Enclosure Kit for Flashforge Adventurer 5M.” Flashforge’s accessory navigation lists the same kit under both AD5M and AD5M Pro, but the installation manual states it applies to the Adventurer 5M only; fit for the AD5M Pro or AD5X is not documented. The installation manual is revision A03 dated 2024-07-10, though its PDF metadata title reads A01 dated 2024-01-30, a file-version discrepancy rather than a product revision. The Amazon listing for this kit is ASIN B0GCH7BQ5L. Do not confuse the kit with the printer itself.

来源

Manufacturer:

Independent reviews:

  • No independent reviews or instrumented tests were found for this kit.

Owner reports:

本分类的选购指南

Bondtech Prusa I3 MK3S+/MK3S / MK2.5S ExtruderELEGOO Metal Resin Tank for Mars 4 LCD 3D PrinterFLASHFORGE AD5M 3D Printer Enclosure 3MM PC Kit
3D打印配件与扫描仪

2026 年如何选择 3D 打印配件

按实际解决的问题选择 3D 打印配件：线轴整理、防潮控制、防气流敏感打印、空气排放控制或捕捉曲面物体。带盖支架不是烘干盒，打印机帐篷不是自动空气净化器，扫描网格不是可编辑的机械图纸。在添加硬件前，请核对兼容性、操作要求和可衡量的结果 [1][3][5]。 2026 年 3D 打印配件值得买吗？ 值得 …

阅读指南

对比

另见

相关商品