Creality Falcon A1 20W Laser Engraver & Cutter
品牌 Creality · 多头3D打印机 · 3D打印 · 更多 Creality 商品
- 激光（标配）: 20 W 半导体（蓝色）激光，455±5 nm，spot 尺寸约为 0.08–0.10 mm
- 激光（可选）: 2 W 固态激光，1064±1 nm，spot 尺寸约为 0.03 mm，另售
- 工作区域: 358 × 268 mm
- 雕刻速度: 最高至 600 mm/s
- 自动对焦: AI 视觉自动对焦精度低于 0.012 英寸（制造商声明）
所见最低价
$799.00
$799.00 起，Creality 3D Official · 核查于 2026年10月24日
- Creality 3D Official $799.00前往 Creality 3D Official
- Creality Falcon $879.00前往 Creality Falcon
- Creality前往 Creality
- eBay前往 eBay
- eBay (used) eBay: used, open-box, refurbished前往 eBay (used)
商店按固定顺序排列，绝不按价格或佣金排序。 价格仅为快照，请以商店当前价格为准。
摘要
这款为家庭和教室设计的封闭式 CoreXY 二极管激光器搭载 20 W 蓝色激光和可选的 2 W 红外模块，工作区域为 358 × 268 mm，内置摄像头和触摸屏。所有性能数据均来自制造商声明：未找到针对该 exact 款型型号的独立测试或用户讨论，因此购买前请注意保修和退货条款。
优点
- 具备盖子开启停止、火焰检测和倾倒停止功能的封闭式 Class 1 舱体，可在正常使用中将激光束控制在内部。
- 内置 HD 摄像头、自动对焦和触摸屏，承诺实现摄像头优先的工作流程，无需额外笔记本电脑。
- 额定速率达 600 mm/s 的 CoreXY 运动系统，配合 358 × 268 mm 的工作区域，适用于小至中型项目。
- 可选的 2 W 红外模块扩展了金属和深色亚克力的处理能力。
- 内置空气辅助和烟雾排出滤芯属于标配，而非选配配件。
- 支持 100–240 V 电源，并兼容 Windows 和 macOS 操作系统，配套的 Falcon Design Space 和 LaserGRBL 软件免费使用。
缺点
- 所有性能数据均为制造商声明；未找到针对该 exact 款型型号的独立测试。
- 2 W 红外模块为选配且另行购买。
- 蓝色激光无法切割透明亚克力。
- IR 模块性能会随温度变化而降低，使用温度超过 35 °C 不在保修范围内。
- 长时间运行可能提升激光温度，降低输出功率；建议冷却 30 分钟以上。
- 火焰检测在明亮窗口附近或光线快速变化时可能误报警。
已核实规格
| 激光（标配） | 20 W 半导体（蓝色）激光，455±5 nm，spot 尺寸约为 0.08–0.10 mm。 |
|---|---|
| 激光（可选） | 2 W 固态激光，1064±1 nm，spot 尺寸约为 0.03 mm，另售。 |
| 工作区域 | 358 × 268 mm。 |
| 雕刻速度 | 最高至 600 mm/s。 |
| 自动对焦 | AI 视觉自动对焦精度低于 0.012 英寸（制造商声明）。 |
| 摄像头 | 内置 HD 摄像头，支持实时预览、批量处理和自动定位。 |
| 控制 | 集成触摸屏、移动 App、App-to-Screen 启动。 |
| 安全 | Class 1（FDA），封闭设计带盖子开启停止功能，火焰检测带 App 提醒，倾倒急停，风流监测。 |
| 空气辅助 | 内置。 |
| 烟雾处理 | 内置烟雾排出滤芯和激头上的两个散热风扇。 |
| 软件 | Falcon Design Space、LightBurn、LaserGRBL。 |
| 文件格式 | JPEG/JPG/PNG/BMP/SVG/DXF 等。 |
| 操作系统 | Windows 和 macOS。 |
| 操作温度 | 5–35 °C（IR 模块 10–35 °C，最佳 20–30 °C）。 |
| 电源 | 100–240 V，50–60 Hz；输出 DC 24 V，7.5 A。 |
| 尺寸 | 567 × 468 × 211 mm（屏幕安装后为 685 × 468 × 211 mm）；重量 16.8 kg。 |
| 认证 | FDA、CE、ROHS、FCC、PSE。 |
| 保修 | 正常使用下的非人为性能故障，保修 12 个月。 |
| 材料（蓝色激光） | 箱板、木材、竹材、橡胶、皮革、织物、亚克力、塑料、涂漆金属等；蓝色激光无法切割透明亚克力。 |
| 材料（IR 模块） | 金、银、黄铜、铁、铝、不锈钢、塑料、深色不透亚克力、钛合金、电镀金属、页岩、陶瓷坐杯等。 |
| 声称支持材料种类 | 超过 350 种。 |
| 包装内容 | 提及赠送免费测试套件；其他内容未在所读页面中记载。 |
完整研究笔记与来源
Safety and enclosure
The enclosure is rated Class 1 (FDA), so the beam stays contained during normal use and goggles are not strictly required, though the manufacturer still recommends them. Flame detection sends app alerts but can false-alarm near bright windows or in rapidly changing ambient light. The manufacturer strongly recommends an air purifier, especially for acrylic and organic materials. Belt tension affects geometry; a loose belt can turn circles into ellipses.
Laser and materials
The standard source is a 20 W blue semiconductor laser at 455±5 nm with a spot size of approximately 0.08–0.10 mm. The optional 2 W infrared module at 1064±1 nm with a spot size of approximately 0.03 mm extends the machine to metals and dark opaque acrylics, but it is bought separately and its performance degrades with temperature: preheat below 20 °C, optimal at 20–30 °C, thermal protection above 30–35 °C, and use above 35 °C is not covered by warranty. The blue laser cannot cut transparent acrylic. Long use can raise laser temperature, reducing output and causing uneven cutting, so a 30+ minute cooldown is recommended.
Software and workflow
Control runs through Falcon Design Space, LightBurn or LaserGRBL on Windows and macOS, with common image and vector formats supported. LightBurn is a 30-day trial before a paid license; Falcon Design Space and LaserGRBL are free. The machine accepts 100–240 V input.
Maintenance and warranty
Per the manufacturer FAQ, clean the protective lens and air nozzle with a dust-free cloth and alcohol, keep the honeycomb plate under wood to reduce back-side burn marks, adjust belt tension, maintain the exhaust fan, and use weak air assist for engraving and stronger flow for cutting. Warranty runs 12 months for non-artificial performance failure under normal use, and the buyer must ship the item within 7 natural days after contacting support to receive free warranty service. Repair-parts availability for this exact model was not documented on the pages read.
Is it worth it?
The captured store price was $879.00 against a $1,099.00 compare-at figure (Creality official store, 2026-10-24). At $879 the machine sits in the premium enclosed-diode tier, and its case rests on the combination of an enclosed Class 1 chamber, camera preview, touchscreen, autofocus, air assist and dual-laser capability rather than on any single spec. Ownership costs extend beyond the machine: materials, an optional air purifier, optional risers and honeycomb accessories, replacement lenses, and a LightBurn license after its 30-day trial. No subscription or capsule lock-in applies. Without independent validation, the purchase decision should weigh the enclosed safety, camera workflow and dual-laser flexibility against alternatives with deeper test and owner histories, and weigh return policy and warranty terms heavily.
Which model this is
This page covers the Creality Falcon A1 Pro 20W Dual-laser Engraver, sold as “Falcon A1 Pro 20W Laser Engraver & Cutter,” an enclosed Class 1 diode laser with a standard 20 W blue semiconductor laser and an optional separately purchased 2 W infrared module. It is not the Falcon A1 10 W, Falcon A1C, Falcon2 or Falcon2 Pro, and those models’ performance data are not used as exact-model evidence. No color or revision variants or alternate SKUs were documented on the pages read. Machine dimensions are 567 × 468 × 211 mm, or 685 × 468 × 211 mm after screen installation, with a net weight of 16.8 kg.
来源
Manufacturer:
- Creality Falcon A1 Pro 20W Dual-laser Engraver product page
- Creality Falcon Warranty Policy
- Creality Wiki: Falcon A1 Pro FAQ
- Creality Wiki: Falcon A1 Pro
- Creality Falcon download center
- Creality store product page (original listing)
Independent reviews:
- No independent instrumented test of this exact model was located.
Owner reports:
- No exact-model owner discussion was usable as a source in this research pass.
