
Z GRILLS 2026 700 sq in
By Z GRILLS · Pellet Grills · Kitchen & Cooking
- 700 sq in of cooking area
- 2026-model listing
Lowest price seen
~$539.00 (approx.)
from $539.00 at Amazon
- Amazon ~$539.00 (approx.)View at Amazon
- eBayView at eBay
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
Prices are snapshots. Check the current price with the store.
Summary
A large 697 sq in pellet smoker built for low-and-slow cooking, with PID 3.0 control, two meat probes and a hopper cleanout. Check the revision and the Wi-Fi question before you buy, because older 700D6 listings describe a different controller and this exact model has no built-in Wi-Fi.
Strengths
- 697 sq in of two-tier cooking area handles family meals and larger cuts.
- The dual-wall insulated base helps hold low-and-slow temperatures.
- Z-Ultra PID 3.0 controller with an advertised 180–450°F range.
- Two built-in meat probes and a large LCD.
- The rear hopper cleanout makes pellet changes easier.
- A fitted cover and the probes are included.
Weaknesses
- No built-in Wi-Fi is advertised, so remote monitoring needs a separate thermometer or a controller upgrade.
- 450°F indirect heat cannot match a direct-flame sear.
- Hopper capacity is unresolved, with 20 lb and 28 lb appearing across sources.
- Exact-model weight and chassis material both conflict across listings.
- No long test of the PID 3.0 revision exists, so precision claims are unverified.
- Pellet grills need regular ash vacuuming, grease cleaning and dry pellet storage.
Verified specifications
| Model | VC-700D6, bronze; ASIN B0GGRR83P6; UPC 810105184150. |
|---|---|
| Fuel and power | wood pellets with AC electricity for the controller, auger, fan and igniter. |
| Cooking area | 697 sq in total across two tiers. |
| Temperature range | 180–450°F with Z-Ultra PID 3.0. |
| Insulation | dual-wall base and lower chamber, not a fully double-wall body. |
| Monitoring | large LCD with 2 built-in meat probes. |
| Hopper | marketed for up to 28 hours of cooking, with a rear pellet cleanout; capacity in pounds is unresolved. |
| Modes | 8-in-1 marketing covering smoke, grill, roast, bake and similar indirect cooking, with no direct-flame sear. |
| Dimensions | about 48 × 22 × 51 in. |
| Weight | 120 lb by the exact listing; an independent 700D6 table says 132 lb. |
| Materials | the listing says aluminum outer and stainless-steel inner, while older 700D6 copy describes alloy steel; the conflict is unresolved. |
| Included | fitted cover and two meat probes. |
| Warranty | 3 years. |
Full research notes and sources
Cooking area and temperature control
The 697 sq in figure is the number to trust; the round 700 sq in in the marketing rounds it up, and the upper rack is part of the total. Older 700D6 material splits the area as 504 sq in main plus 193 sq in upper, though the current listing confirms only the total. The Z-Ultra PID 3.0 controller runs an advertised 180–450°F, which covers smoking and roasting well. An older 700D6 owner recorded occasional 10–15°F swings across an 11-hour cook, and community reports note that the built-in chamber reading can disagree with an independent probe. No lab test covers this PID 3.0 revision, so treat precision claims as unproven.
No Wi-Fi and no direct sear
This exact listing does not advertise built-in Wi-Fi, and roundups that describe the 700D6 as Wi-Fi-equipped are wrong for this ASIN. Z Grills sells a compatible controller board separately, and remote monitoring otherwise needs a standalone thermometer. The 8-in-1 label covers smoke, grill, roast, bake and similar indirect modes; there is no direct-flame path, so 450°F is enough for burgers and roasting but not for a hard steak sear.
Ownership and upkeep
This is conventional pellet-grill ownership: keep pellets dry, empty the hopper before long damp storage, vacuum ash from the fire pot after several cooks, keep the grease path and drip tray clean, and wipe the chamber probe. Z Grills sells 700-series grates, a front shelf, a thermal blanket and the Wi-Fi board, so some service and upgrade parts remain obtainable, though the direct parts inventory is incomplete. The grill carries a 3-year warranty and a 30-day direct-site return policy. Pellets are the main running cost, commonly around 1–2 lb per hour at low-and-slow temperatures.
Is it worth it?
Buy it on sale. It is a solid capacity-and-insulation buy for someone who wants a large, simple smoker, but the value case improves well below its typical price. If direct-flame searing or app control matters, compare against rivals that offer those features before committing. Most importantly, do not let a listing mix this 2026 PID 3.0 unit with older PID 2.1 700D6 specifications.
Which model this is
This page covers the 2026 Z GRILLS VC-700D6, ASIN B0GGRR83P6 and UPC 810105184150. Older 700D6 listings and manuals describe PID 2.1, so their specs are a different revision rather than this exact unit. Do not mix in the 700D, 700D3, 700D4E, 7002C or 7002C2E, which are different grills.
Sources
Manufacturer:
Independent reviews:
- No instrumented lab review of the exact PID 3.0 revision was found
Owner reports:




