Skip to content

YOOPAI 3D Printer Filament Storage Box

By YOOPAI · Filament Dryers · 3D Printing

  • 2-tier metal storage rack
  • Holds up to 12 rolls of 1KG filament
  • Transparent cover for dust protection
  • Iron frame construction
  • Dimensions 17.71 x 17.71 x 19.68 inches

Price not listed

Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.

Summary

A passive two-tier rack that holds up to 12 standard 1 kg filament spools behind a transparent vinyl cover. Check what it is not: there is no heater, so it organizes spools and slows moisture with desiccant rather than drying wet filament.

Strengths

  • Holds up to 12 standard 1 kg spools, enough to organize a small workshop.
  • The iron frame stayed rigid under a full load of 24 × 1 kg spools in testing, with no bowing.
  • The transparent vinyl cover keeps dust off and lets you see what is loaded.
  • Assembly is tool-free and took under 10 minutes in testing.
  • An active modification community publishes replacement T-mounts and reusable desiccant trays.
  • There is no power draw, and the only running cost is occasional desiccant.

Weaknesses

  • It is not a dryer; the manual states it is not an active filament drying box or dehydrator.
  • The zipper is not airtight, so humidity equalizes with the room over time.
  • One owner called the supplied desiccant packs ineffective and non-reusable.
  • The vinyl cover is a tight fit and may need warming before it goes on.
  • The plastic T-mount connectors can break under load.
  • It is not suitable for long-term storage of nylon or PVA without vacuum bags.

Verified specifications

ModelYOOPAI 3D Printer Filament Storage Box, 2-tier rack.
Capacityup to 12 standard 1 kg spools (6 per tier) or 20 rolls of 250 g filament (10 per tier).
Frameiron, with a transparent vinyl cover and zipper closure.
Dimensions17.71 × 17.71 × 19.68 in; the manufacturer page does not list exact dimensions for this variant.
Included desiccant4 packs, according to the manual for the related 24-roll variant.
Extrasside panels with hooks for tools, and rubber feet.
Powernone; passive storage only, not an active filament drying box or dehydrator.
Full research notes and sources

What it is and is not

The manual is blunt: this is for organization and short-term moisture reduction with desiccants, not an active filament drying box or dehydrator. That distinction drives everything else. It will keep dust off a dozen spools and give you a visible inventory, and the iron frame held a full load without bowing in an independent test of the related 24-roll version. It will not rescue wet filament; you still need a heated dryer for that.

Humidity and desiccant

The catch is that the zipper is not fully airtight, so humidity drifts back toward the room once the desiccant is spent or the zipper is opened often. Treat it as a slowing layer, not a sealed box, and refresh desiccant on a schedule. A MakerWorld owner found the included packs weak and not reusable and designed printable trays for better desiccant. For nylon or PVA you plan to store for months, use vacuum bags instead.

Cover, connectors and mods

The transparent cover is a thick vinyl that acts as an effective dust barrier, but it fits tightly and the review suggests warming it to make installation easier. The weakest hardware is the plastic T-mount connectors, which can break under load; users have published 3D-printed replacements. MakerWorld also hosts a base and reusable desiccant trays for the YOOPAI boxes. These are community parts, not official spares, so print them before a connector fails rather than after.

The manufacturer lists the 2-tier rack at $27.99 to $65.99 depending on configuration. At the entry price the value is strong for anyone with 6 to 12 spools who wants dust protection and a visible inventory without paying for an active dryer. Above $50 the case weakens, because heated dryers with humidity control sit near the same money. This rack does not replace a dryer for wet filament or a vacuum setup for long-term storage of exotic materials, so do not pay a premium for it as if it did.

Which model this is

This page covers the 2-tier, 12-roll rack. It is not the YOOPAI Pro single-spool airtight containers, the 4-pack 4.0 L airtight boxes, or the 24-roll variant that uses a cloth cover and a different capacity. The listing carries ASIN B0F8HPBGXZ. Because the manufacturer page mixes 1 kg and 250 g capacities, confirm the tier layout and cover material on the exact listing, since the 12-roll and 24-roll models share a similar name but ship different covers.

Sources

Manufacturer:

Independent reviews:

Owner reports:

Buying guides for this category

Related products