TempPro TempSwift 1 Sec Instant Read Meat Thermometer
By TempPro · Kitchen Utensils · Kitchen & Cooking · More from TempPro
- 1-second response time
- Accuracy ±0.9°F
- Temperature range -58°F to 572°F
- IP65 waterproof
- Backlit display with motion-sensing wake
Price not listed
- TempProView at TempPro
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
- eBayView at eBay
- AmazonView at Amazon (paid link)
Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.
Summary
A budget instant-read thermometer for home cooks who want fast, rinse-clean temperature checks without paying Thermapen money. Before you buy, check which sensor you are getting: this TP19H uses an NTC sensor, while the newer TP19 ELITE uses a thermocouple and reads faster.
Strengths
- IP65 waterproofing means it can be rinsed under the tap after use.
- Motion sensing wakes it when you pick it up and puts it to sleep after 90 seconds.
- The auto-rotating, backlit display stays readable from almost any angle.
- The warranty runs three years if you register the product.
- Owners report multi-year battery life on a single AAA.
Weaknesses
- The probe can break loose at its base hinge after months of use, a recurring owner complaint.
- The ±0.9°F accuracy applies only between 14 and 212°F; outside that range the tolerance widens to ±1.5%.
- Some units eventually show only dashes on the display.
- It is a handheld tool only and is not meant to be left in food while it cooks.
Verified specifications
| Model | TP19H, also branded as the ThermoPro TP19. |
|---|---|
| Sensor type | NTC. |
| Response time | claimed 1 second. |
| Accuracy | ±0.9°F (±0.5°C) from 14 to 212°F (−10 to 100°C); ±1.5% outside that range. |
| Temperature range | −58°F to 572°F (−50°C to 300°C). |
| Resolution | 0.1°F and 0.1°C. |
| Waterproofing | IP65, safe under running water. |
| Display | LCD, 1.75 × 0.75 in, backlit and auto-rotating through 180°. |
| Motion sensing | powers on when the probe opens, sleeps after 90 seconds of inactivity, wakes when picked up. |
| Lock function | holds a reading for 5 seconds. |
| Calibration | user-accessible via the CAL button, using the ice-bath or boiling-water method. |
| Battery | one AAA, included. |
| Warranty | one year limited, extendable to three years with product registration. |
| Dimensions | 6.18 × 1.625 × 0.81 in (156 × 41 × 20.5 mm); 3 oz (85 g). |
| Probe | 304 stainless steel, 4 in (110 mm) per the manufacturer, 0.138 in (3.5 mm) diameter with a 0.069 in (1.75 mm) tip. |
| In the box | thermometer, AAA battery and user manual. |
| Storage | built-in magnet and a hanging hole. |
Full research notes and sources
How fast it actually reads
The 1-second response time is the manufacturer’s best-case figure. For a quick check on a steak or a chicken breast, a couple of seconds is normally fine; for high-volume cooking the lag is more noticeable.
Build quality and the probe base
Multiple people report the probe breaking loose at the base hinge after months of use, and TempPro revised the design to reinforce that joint. One unit in a professional kitchen was reported to fail after about a year of heavy use. TempPro support has sent a free replacement probe in at least one case, and a support article covers a display that shows only dashes. Nobody has published a failure rate, so treat the hinge as a known wear point rather than a defect.
Which model this is
This page covers the TempPro TP19H, the NTC-sensor instant-read model sold under ASIN B07XXSYLL8 and also branded as the ThermoPro TP19. It pairs a 4-inch (110 mm) 304 stainless steel probe with a backlit, auto-rotating display and IP65 waterproofing.
Two similarly named models are different inside. The original TP-19 and the newer TP19 ELITE both use a thermocouple sensor, and the ELITE claims a 0.5-second response with a 4.31-inch (110 mm) probe. The Amazon listing for this model states a 4.3-inch probe, which looks like the ELITE spec carried over.
Running costs
Running costs are low. It runs on a single AAA battery, which is included, and owners report years of use before a change. There is no subscription and no accessory lock-in.
Is it worth it?
At the TempPro direct price of $18.99, the TP19H is strong value: IP65 waterproofing, motion-sensing wake, and a three-year warranty with registration. TempPro lists the TP19 ELITE at $29.99, and that model’s thermocouple sensor reads faster, so buyers who want the quickest read should weigh the $10 gap. Above $30, established alternatives with more independent test data make more sense.
Sources
Manufacturer:
- TempPro TP19H product page
- TempPro TP19 ELITE product page
- ThermoPro TP-19H instruction manual
- TempPro support — TP-19H section
Independent reviews:
Owner reports: