Raise3D Pro3 HS Series: problems, parts and running costs
Checked: 2026-11-06
Summary
The Pro3 HS Series’ main limitations are the 500 mm/s headline speed requiring specific Hyper Core filaments (standard materials typically run at 100-300 mm/s) and the need for separately purchased 2.5 kg filament storage boxes to enable auto filament switching. Running costs are primarily specialized filaments ranging from €36-209 per kg, with no mandatory subscription. It is justified at the lower end of its range for industrial users needing high-volume output with carbon fiber composites, but overpriced for prototyping given the lack of independent validation of claimed performance benefits.
Common problems and fixes
- 500 mm/s speed requires specific materials — the maximum 500 mm/s printing speed is only achievable with Raise3D’s Hyper Core filaments; standard PLA, ABS and PETG typically print at 100-300 mm/s. No fix beyond using the proprietary materials. [1][2]
- Auto filament switching requires separate purchase — the auto filament switching feature is not fully functional without purchasing 2.5 kg filament storage boxes sold separately. No workaround available without the accessory. [1][2]
- RFID filament sensor not yet available — the RFID filament sensor is listed as available but depends on future spools with RFID tagging; current implementation does not support it. No fix timeline provided. [1][2]
- HEPA filter requires periodic replacement — the HEPA filter with activated charcoal needs regular replacement for effective particle removal, but Raise3D has not published detailed maintenance intervals or replacement pricing. [1][2]
- Warranty terms not documented — specific warranty coverage and replacement part pricing beyond the warranty period are not published publicly, making long-term ownership costs uncertain. [1][2]
- Closed-loop maintenance unknown — the closed-loop stepper motor system may require different maintenance procedures than traditional open-loop systems, but detailed guidance is not available. [1][2]
Parts and consumables
- Hyper Core filaments (PPA CF, PPA GF, ABS CF) — €36-209 per kg from Raise3D European Shop, November 2026. [1][2][5]
- Industrial composite filaments (PET CF, PET GF, PETG ESD) — €59-99 per kg from Raise3D European Shop, November 2026. [1][2][5]
- Standard filaments (PLA, ABS, PETG) — €29-49 per kg from Raise3D European Shop, November 2026. [1][2][5]
- All-metal nozzles — strengthened hot ends designed for high-speed printing; no replacement pricing published. [1][2]
- Flexible steel build plate with Buildtak — magnetic build plate for improved adhesion; no replacement pricing published. [1][2]
Yearly running cost
The primary recurring cost is specialized filament materials: Hyper Core filaments at €36-209 per kg and industrial composites at €59-99 per kg, with standard filaments at €29-49 per kg. The HEPA filter with activated charcoal requires periodic replacement but no pricing or interval is published. There is no mandatory subscription. Energy consumption during high-speed printing is not documented. Not enough data for a precise annual figure due to missing maintenance pricing and energy information.
When it is a good buy
Raise3D European Shop lists the Pro3 HS at €4,999 and the Pro3 Plus HS at €6,499, November 2026. [1][2][4]
- At €4,999 or below — fair value for industrial users requiring high-volume output with carbon fiber composites and the closed-loop motion control, provided the 30-70% time savings claim holds for your work. [1][2]
- At €6,499 — justified only if the 605 mm build height of the Pro3 Plus HS is specifically needed for your projects. [1][2][4]
- Alternatives — the Pro3 Plus HS for taller builds (300×300×605 mm vs 300×300×300 mm); older Raise3D product series with Hyper FFF upgrade for lower-volume work that doesn’t require Hyper Core composites or auto filament switching. [1][2]