QIDI Q2C

QIDI Q2C

By QIDI · Budget 3D Printers · 3D Printing

  • Build volume 270x270x256 mm
  • Max speed 600 mm/s
  • Max nozzle temperature 370 C
  • Max bed temperature 120 C
  • Fully enclosed CoreXY frame

Lowest price seen
$113.70
from $113.70 at qiditech.shop · Checked Oct 12, 2026

Prices are snapshots. Check the current price with the store.

Summary

An enclosed CoreXY FDM 3D printer with a 370 °C nozzle, 120 °C bed, and Klipper firmware at $349. Check whether you need active chamber heating before buying: the Q2C lacks it, which limits ABS and ASA performance in cool rooms.

Strengths

  • Enclosed flame-retardant chamber with MET certification for US/Canadian electrical safety.
  • 370 °C bimetal nozzle and 120 °C bed handle engineering filaments like PA and PC.
  • Hands-free loadcell auto-leveling uses the nozzle as a sensor; PCMag called it “works spectacularly” on the sibling Q2.
  • CoreXY motion with a linear guide rail on X and dual lead screws on Z.
  • Klipper firmware with OrcaSlicer and PrusaSlicer support.
  • At $349 it is the cheapest enclosed CoreXY printer in QIDI’s lineup.

Weaknesses

  • No active chamber heating: ABS and ASA prints may warp or delaminate in cool rooms.
  • No air filter included; the optional add-on adds cost for buyers concerned about ultrafine particles.
  • No spare nozzle in the box; PCMag noted this on the Q2 and it applies to the Q2C.
  • The 600 mm/s speed is a manufacturer claim; one owner reports preferring 200–250 mm/s for outer walls.
  • Long-term reliability remains uncertain; owner volume on forums is still low.
  • The QIDI Box multi-color unit (Combo variant) had “insurmountable friction in the filament path” in Tom’s Hardware testing.

Verified specifications

Build volume270×270×256 mm.
Max toolhead speed600 mm/s (manufacturer claim, not guaranteed print speed).
Max acceleration≤20,000 mm/s².
Nozzle temperature≤370 °C (bimetal nozzle with hardened steel insert).
Bed temperature≤120 °C.
XY structureCoreXY, 1.5GT belt.
X axishigh-hardness linear guide rail.
Z axisdual independent lead screw motors.
Extruderhardened steel dual gears, direct drive.
Nozzle diameter0.4 mm default; 0.2/0.6/0.8 mm optional.
Build platedouble-sided PEI magnetic on aluminum substrate heating bed.
Supported filamentPLA, ABS, ASA, PETG, TPU, PA, PC, carbon/glass fiber reinforced polymer.
Filament diameter1.75 mm.
Automatic levelinghands-free, loadcell sensor integrated into hotend (nozzle-as-sensor).
Filament detectionrun-out sensor; tangle detection requires QIDI Box.
AI camera detectionno (camera optional for timelapse only).
Chamber temperatureno active heating (flame-retardant chamber retains some bed heat).
Air filteroptional (not included standard).
Power loss recoveryyes.
Input shapingyes.
Voltage110 V / 220–240 V AC, 50/60 Hz (region-specific models).
Rated power350 W.
Display4.3-inch 480×272 touchscreen.
Connectivity2.4 GHz Wi-Fi, Ethernet, USB.
Storage32G eMMC and USB 2.0 flash drive.
SlicerQIDI Studio; third-party OrcaSlicer, PrusaSlicer supported.
File formatsSTL, OBJ, 3MF, STEP, STP.
Multi-colorcompatible with QIDI Box (optional accessory).
SafetyMET-certified (US/Canada NRTL); IECEE CB internationally.
Dimensions402×438×494 mm (15.8 × 17.2 × 19.4 in); net weight 16.9 kg (~37 lb).
In the boxprinter, touchscreen (detached, requires plugging in), external spool holder, Ethernet and power cables, toolkit, flash drive, quick start guide.
Warranty1-year coverage per the manufacturer’s US store.
Full research notes and sources

Chamber heating and materials

The Q2C’s spec sheet explicitly lists “Chamber Temperature: No.” The enclosure retains some heat from the bed but cannot control chamber temperature like the Q2 ($499), which adds active 65 °C chamber heating. For PLA and PETG this matters less. For ABS, ASA and PC, a warm enclosure reduces warping and layer splitting. One owner reported an ASA toolhead cover split between layers when using an exhaust hose with the fan at full power. If you primarily print engineering materials, the Q2’s heated chamber is worth the $150 premium.

The Q2C shares its core hardware with the Q2, which PCMag reviewed in December 2025. The nozzle-as-sensor loadcell leveling system “works spectacularly, with excellent first-layer tests.” Dimensional accuracy was excellent on the Autodesk/Kickstarter test, with the go/no-go tolerance gauge reaching the 0 mm slot. PCMag noted Z-banding on the sides of PLA and PETG test prints; the issue disappeared with ABS-CF, possibly because carbon fiber filled layer gaps. A nozzle jam occurred during initial PLA loading on the Q2; cold-pull procedures could not clear it and a replacement nozzle was needed. No extra nozzles were included.

Running costs and upkeep

Standard FDM maintenance applies: nozzle changes, belt tension, lead screw lubrication, and build plate cleaning with isopropyl alcohol or warm water and dish soap. Avoid acetone on textured PEI. The bimetal nozzle supports filaments up to 370 °C, which accelerates nozzle wear when printing abrasive materials like carbon fiber. Replacement nozzles cost extra — no spare is included. Filament is the main recurring cost; materials that require drying need a drying setup, and the QIDI Box can serve as a filament dryer. Optional accessories (QIDI Box for multi-color, air filter, camera) add to the total.

Is it worth it?

At $349 the Q2C is a reasonable first enclosed printer for PLA and PETG work, especially for buyers who value safety certification and a flame-retardant enclosure. It undercuts the Q2 by $150 by removing chamber heating, air filter, and AI camera. For ABS, ASA and PC users, the Q2’s heated chamber is worth the step up. Accessory costs narrow the price gap with the Q2 — compare a fully-accessorized Q2C against the Q2 before deciding. Long-term reliability remains uncertain; owner volume on forums is still low. The Q2 sibling has some QC complaints (DOA touch screen, failed prints, refund disputes), but these are not Q2C-specific and do not establish a defect rate.

Which model this is

This page covers the QIDI Q2C, launched November 2025. It is the entry-level variant of the Q2 series, distinguished from the Q2 by lacking active chamber heating, a standard air filter, and an AI camera. Two purchase variants exist: Q2C (printer only) and Q2C Combo (printer + QIDI Box multi-color unit). The manufacturer’s US store lists the Q2C at $349 and the Combo at $529. An earlier $379 price was reduced to $349 as a standing price in 2026. Do not confuse it with the QIDI Q2, QIDI Plus4, QIDI Plus5, QIDI Max4, or older QIDI models.

The Amazon listing is ASIN B0FVLZ8FRD.

Sources

Manufacturer:

Independent reviews:

Owner reports:

Buying guides for this category

Related products