OVERTURE High Speed PLA: problems, parts and running costs

Checked: 2026-10-25

Summary

Owners report smooth feeding on common FDM printers, but one Prusa Mini+ owner reports nozzle clogging and poor overhangs after a formula change, plus uneven winding and weaker bed adhesion on alcohol-cleaned beds. Filament is a consumable with no replaceable parts; recurring costs are desiccant, drying, and replacement nozzles. Manufacturer direct price observed: $13.99-$23.99 per 1 kg depending on color (product page, 2026), with lower per-spool prices in 2/4/10-pack bundles.

Common problems and fixes

• Nozzle clogging and poor overhangs after formula change — one Prusa Mini+ owner reports the new High Speed PLA formula clogs where the previous formula worked for three years; advice is to run a temperature tower and a maximum volumetric flow test. [6]
• Uneven winding on some batches — re-spooling or reversing direction resolves. [5]
• Weaker bed adhesion on alcohol-cleaned beds — washing the bed with dish soap and warm water is recommended. [5]
• “High speed” claim vs data sheet — product page advertises up to 300 mm/s while the linked TDS recommends 40-70 mm/s; treat the speed claim as marketing. [1][2]

Parts and consumables

No replaceable parts or consumables reported.

Yearly running cost

Not enough data.

When it is a good buy

Manufacturer direct price observed: $13.99-$23.99 per 1 kg depending on color (product page, 2026), with 2-pack, 4-pack and 10-pack bundles at lower per-spool prices. Choose PLA+ when parts need higher strength; choose the previous/standard PLA formula if the high-speed version clogs on your printer. [1][5]

Sources

• OVERTURE High Speed PLA product page
• OVERTURE PLA Technical Data Sheet EN V5.1 (PDF)
• Overture 3D Warranty Policy
• Prusa3D Forum: Overture High speed PLA - advise on settings?
• OVERTURE TURBO PLA Technical Data Sheet V5.1 (PDF) " filePath"> /opt/projects/cashback-content-site/research/products/overture-high-speed-pla/guide.md