Skip to content
OVERTURE Easy PLA

OVERTURE Easy PLA

By OVERTURE · Filament & Resin · 3D Printing · More from OVERTURE

  • 1.75 mm diameter
  • +/-0.02 mm dimensional accuracy
  • 1 kg (2.2 lb) spool
  • Nozzle 190-220 C
  • Bed 25-60 C

Price not listed

New
Used, refurbished, open-box

Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.

Problems, parts and running costs

Summary

A 1.75 mm budget PLA in 29 colors, sold as 1 kg on a recyclable cardboard spool, aimed at beginners and high-volume printing. It prints cleanly at default PLA settings on common machines, but it is slightly more tangle-prone than Overture’s PLA Basic and its Vicat softening point sits near 66 °C.

Strengths

  • Prints cleanly at default PLA settings on Ender 3, Bambu Lab, and Prusa machines, including at higher speeds.
  • Low warp and strong bed adhesion; clean first layers without brim on basic beds.
  • Vibrant, consistent color with a semi-matte finish that hides layer lines.
  • Tidy, tangle-free winding with a larger inner spool diameter that reduces coil memory.
  • Affordable at about $18-21/kg direct, good for practice and bulk printing.
  • Vacuum-sealed with desiccant; recyclable cardboard spool.

Weaknesses

  • Slightly more tangle-prone than PLA Basic, per the manufacturer’s own positioning.
  • Occasional spools arrive wet, showing popping and stringing until dried.
  • Cardboard spool can shed dust in some feeders and create friction in AMS-style systems.
  • Color-to-color temperature variation means settings may need adjustment when changing colors.
  • Heat resistance is limited, with Vicat softening near 66 °C.
  • No independent instrumented test of Easy PLA specifically was found.

Verified specifications

ProductOverture Easy PLA 3D printer filament, 1.75 mm, 1 kg (2.2 lb) spool.
Diameter1.75 mm; manufacturer-claimed accuracy ±0.02 mm via CCD measuring system.
Nozzle temperature190-220 °C.
Bed temperature25-60 °C.
Print speed40-90 mm/s (TDS); manufacturer product page lists 40-60 mm/s.
Cooling fanon.
Retraction distance1-3 mm; retraction speed 20-40 mm/s.
Raft separation distance0.1-0.2 mm; threshold overhang angle 60°.
Test conditions for mechanical datanozzle 205 °C, speed 60 mm/s, bed 40 °C, 100 % infill; specimens conditioned 24 h at room temperature.
Physicaldensity 1.20 g/cm³ at 21.5 °C (TDS); melt index 10.0 g/10 min at 210 °C, 2.15 kg; melting temperature 149 °C (DSC, 10 °C/min); Vicat softening 66.2 °C.
MechanicalYoung’s modulus (X-Y) 2650 ± 276 MPa; tensile strength (X-Y) 44.3 ± 1.1 MPa; tensile strength (Z) 39.4 ± 0.7 MPa; elongation at break (X-Y) 5.6 ± 0.3 %; bending modulus (X-Y) 3265 ± 173 MPa; bending strength (X-Y) 82.5 ± 3.4 MPa; notched Charpy impact (X-Y) 2.9 ± 0.4 kJ/m².
Drying50 °C (122 °F) for 7 hours.
Finish/colorssmooth, standard PLA look; 29 colorways listed on the manufacturer page.
Spoolouter diameter 200 mm, width 65.6 mm, hub diameter 55 mm, empty spool weight about 147 g.
Net filament weight1 kg.
Density1.20 g/cm³ (TDS) / 1.21 g/cm³ (wiki PLA page).
MaterialPLA (polylactic acid), plant-based; SDS states no hazardous ingredients above cut-off.
Spool materialcardboard (recyclable).
SafetySDS classifies not hazardous; not regulated for transport; melting point 170 °C (SDS) vs 149 °C (TDS, DSC); relative density 1.20; HMIS health 0 / flammability 1 / physical 0.
Manufacturer contactOverture 3D Technologies LLC, 10777 Westheimer Rd, Suite 159, Houston, TX 77042; service@overture3d.com; +1 912-441-8907.
TDS version researchedv5.1, dated July/August 2024. SDS version 2.0, issued 07/26/2024.
Included itemsfilament on spool; product page links to SDS, TDS, print profile, RoHS, REACH documents. Build plate inclusion reported by third-party review sites, not confirmed on the manufacturer page read.
Full research notes and sources

Overture’s own sources disagree on speed: the product page lists 40-60 mm/s, the TDS lists 40-90 mm/s, the cheat sheet lists under 90 mm/s, and the wiki PLA page lists 40-70 mm/s. Treat 40-60 mm/s as the conservative starting point and test up to 90 mm/s. Nozzle 190-220 °C and bed 25-60 °C are consistent across sources, with cooling fan on. Dry at 50 °C for 7 hours if the filament pops or strings.

Moisture, storage and drying

PLA absorbs moisture, and wet filament shows popping, stringing, and rough surfaces. Dry at 50 °C for 4-6 hours in a filament dryer if needed, never above 55 °C.

Cardboard spool and AMS feeders

The cardboard spool is recyclable and keeps costs down, but owners report dust in some feeders and friction or fit issues in AMS-style systems, where a printed adapter is commonly used. Overture’s newer cardboard spools are described as having rounded edges for AMS use, but Bambu’s original AMS guidance recommends an adapter for cardboard spools. A reusable master spool with refill spools is available from Overture.

Strength, heat and when to upgrade

The TDS publishes full mechanical data: tensile strength (X-Y) 44.3 ± 1.1 MPa, tensile strength (Z) 39.4 ± 0.7 MPa, elongation 5.6 ± 0.3 %, notched Charpy impact 2.9 ± 0.4 kJ/m². Review sites note Easy PLA gives up a small amount of impact strength and surface finish versus Matte and High Speed lines. With Vicat softening near 66 °C, it is not suited to hot-car mounts or repeatedly flexed clips. For functional parts under load, PLA+ or PETG is the better upgrade path.

Overture direct listed Easy PLA at $17.99 (sale) against a $20.99 compare-at price at the 2026-10-25 check. At that level it is a budget-tier PLA positioned below PLA Basic in price and slightly below it in tangle resistance. Value is strongest for beginners, prototypes, display models, and high-volume printing where finish matters more than strength. The ±0.02 mm tolerance describes filament strand diameter, not finished-part accuracy.

Is it worth it?

Skip it for functional or heat-exposed parts.

Which model this is

This page covers Overture Easy PLA, 1.75 mm, 1 kg, sold in 29 shades including Easy Black, Easy White, Easy Red, Easy Orange, Easy Beige, Easy Space Gray, Easy Rock White, Easy Cobalt Blue, Easy Purple, Easy Pink, and Easy Caramel. Do not merge it with Overture PLA Basic/Standard, PLA+, Super PLA+, Matte PLA, Rock PLA, Silk PLA, High Speed PLA, PLA Professional, or other Overture grades, which are separate formulations with different settings and properties. The beige 1 kg variant carries ASIN B0DRFNZ3GC; other color ASINs exist. Manufacturer: Overture 3D Technologies LLC, Houston, TX, USA.

Sources

Manufacturer:

Independent reviews:

Owner reports:

Buying guides for this category

Compare with

See also

Related products