Makita XSR01Z: problems, parts and running costs
Checked: 2026-10-30
Summary
Commonly reported issues are the missing LED work light and cut-line blower, the slowest rip speed in its cordless rear-handle group, no vacuum or dust-port attachment, hard-to-read bevel scale, a rafter hook that blocks battery swaps, and shutdowns under sustained heavy use. Running cost is mostly blades and batteries, with the only priced accessory in the research being the DC18RD dual-port charger at $129 (Home Fixated, 2018). Historically a strong buy at about $199 bare (Acme Tools, 2017) for users already on Makita’s 18V LXT platform, with the kit at $349-$360 (2017-2018).
Common problems and fixes
- No LED work light or cut-line blower — sawdust can obscure the cut line on long, deep cuts; no light or blower is fitted and no accessory is listed. [3][4]
- Rafter hook blocks battery access — the extra-wide hook sits in front of the batteries and must be flipped to swap packs. [3]
- Shutdowns under sustained heavy use — overload, overheat and over-discharge protection can shut the saw down; requires cool-down. [2][5]
- Occasional stalls in wet pressure-treated lumber — full-depth cuts in wet 4x4 pressure-treated pine stalled a couple of times under maximum load but finished with less pressure. [5]
- Warranty terms conflict — product page states a 3-year limited warranty while the manual states 1 year from purchase; use the term printed on purchase documentation. [1][2]
Parts and consumables
- Batteries (18V LXT packs, e.g. BL1850B/BL1860B) — sold separately; 5.0Ah or 6.0Ah recommended; an extra set is prudent for continuous job-site use. [2][3][5]
- Dual-port charger DC18RD — $129 (Home Fixated, 2018). [5]
Yearly running cost
Not enough data.
When it is a good buy
Historical thresholds (2017-2018): bare tool about $199 (Acme Tools, 2017) and kit $349-$360 (Pro Tool Reviews / Home Fixated, 2017-2018); DC18RD charger $129 (Home Fixated, 2018). A good buy at or below the historical bare-tool price for users already on Makita’s 18V LXT platform. Alternatives: DeWalt FlexVolt DCS577B (faster ripping at 11.36 s vs 18.64 s and deeper 45° capacity, but heavier and FlexVolt-battery-only; historically $249 bare and $399 kit) for users needing speed or on the FlexVolt platform; a corded Skilsaw SPT77WM-22 worm drive (slower at 27.96 s in the same rip test) for buyers who want lower cost and do not need cordless. [3][4][5]