
Longer Orange 30 Resin 3D Printer
By Longer · Resin 3D Printers · 3D Printing
Compare all Resin 3D Printers side by side →
- 2K monochrome LCD, 2560x1440 resolution
- 47.25 µm pixel size
- Build volume 120 x 68 x 170 mm (4.72 x 2.68 x 6.69 in)
- 2.8-inch color touch screen
- Solid linear Z-axis guide with slider design
Lowest price seen
$149.99
from $149.99 at Longer · Checked Nov 10, 2026
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
Stores with a price are sorted lowest first; commission never changes the order. Prices are snapshots. Check the current price with the store.
Summary
The Longer Orange 30 is a desktop resin 3D printer with a stated 2K LCD (2560x1440, 47.25 µm), a 120 × 68 × 170 mm build volume, a 2.8-inch color touch screen, and LongerWare/Chitubox slicing support. It is listed by the manufacturer at $149.99 (compare-at $269.00) but shown out of stock, and no independent instrumented test of the exact model was found, so treat the resolution and accuracy claims as manufacturer specifications until verified.
Strengths
- Stated 2K resolution (2560x1440) at 47.25 µm is fine for the entry-level resin tier the printer targets.
- Owners on the manufacturer site praise print detail, calling it clean and highly detailed for a starter resin printer.
- Setup is reported as simple, with some owners printing successfully out of the box.
- LongerWare includes one-click supports and is claimed to slice 3× faster than other printers; Chitubox compatibility is also stated.
- Matrix UV LED lighting and a solid linear Z-axis guide are listed features aimed at print uniformity and stability.
- Value for price is a recurring owner theme, with several calling it a good balance of affordability and quality.
Weaknesses
- No independent instrumented test of the exact Orange 30 was found; all performance claims come from the manufacturer.
- The acrylic prefabricated lid is reported as difficult to assemble, and some kits arrived missing trial resin and a spare FEP film.
- Display quality is criticized by at least one owner.
- The 2K LCD type is not specified as monochrome or color on the fetched manufacturer page, so the monochrome claim is unverified.
- Parts availability, package contents, power requirements, and model-specific warranty terms are not published on the fetched pages.
- The printer showed out of stock on the manufacturer site when fetched, and other US retail channels were not verified.
Verified specifications
| Printer type | desktop resin 3D printer (manufacturer: “Resin 3D Printer”; launch article: “LCD SLA 3D printer”) |
|---|---|
| Screen | 2K LCD, 2560x1440 resolution, 47.25 µm pixel size |
| Build volume | 120 × 68 × 170 mm |
| Display | 2.8-inch full-color touch screen |
| Z-axis | solid linear guide with special slider design |
| Lighting | matrix UV LED for uniformity and intensity |
| Safety | high-temperature warning system stops printing if temperature is too high; high-efficiency cooling system |
| Slicer | LongerWare (self-developed), one-click supports, claimed slicing speed 3× faster than other printers; compatible with Chitubox |
| Claimed accuracy | 47.25 µm |
| US variant weight | 8000 g (about 17.6 lb) |
| Warranty | 12 months for major parts, 3 months for wearing parts (site banner states “12-Month Warranty”); no model-specific Orange 30 terms published |
| Software and firmware | manufacturer hosts Chitubox and LongerWare downloads and Orange 30 firmware on its product-support page |
Full research notes and sources
Print quality and claims
The Orange 30’s headline numbers are a 2K LCD at 2560x1440 with a 47.25 µm pixel size, a 120 × 68 × 170 mm build volume, and matrix UV LED lighting. Whether the LCD is monochrome or color is not stated on the fetched manufacturer page, even though the product is commonly described as monochrome. Until confirmed, treat the display type as unknown.
Setup, ownership and maintenance
Owners describe setup as simple and report printing successfully out of the box. Calibration is noted as desirable for best results. The acrylic prefabricated lid is the main assembly complaint, with one owner reporting a damaged appearance after gluing it. Some kits reportedly arrived without a trial resin jar or a spare FEP film. Resin handling and cleanup (50% alcohol and a toothbrush) are part of routine use. Maintenance beyond that is undocumented: no official maintenance schedule, parts catalog, or service documentation for the Orange 30 was fetched. Software and firmware downloads (Chitubox, LongerWare, and Orange 30 firmware) are available on the manufacturer’s product-support page.
Running costs
Recurring costs are consumables: resin, FEP film, and cleaning supplies such as alcohol. No proprietary resin lock-in is stated. Power consumption and electricity cost are not published. Replacement parts and their cost are not documented on the fetched pages. The manufacturer hosts Chitubox, LongerWare, and Orange 30 firmware downloads on its product-support page, so software is available without a subscription.
The manufacturer site lists the US variant at $149.99 with a compare-at price of $269.00, and showed it out of stock when fetched. A 2019 launch article reported a $450 retail price and a $229 Kickstarter early-bird price that included a 250 ml bottle of resin; the Kickstarter campaign raised $153,199 from 487 backers against a $30,000 goal between 2019-05-30 and 2019-06-29. These figures span different years and channels, so they are not directly comparable. No current US retail availability beyond the manufacturer site was verified, and no competitor prices were retrieved, so a firm value threshold cannot be set from the available sources.
Is it worth it?
Whether the Orange 30 is a good buy depends on what is verified. The stated specifications are competitive for an entry-level resin printer, and owner feedback on detail and ease is positive. Against that, there is no independent test, parts and package contents are undocumented, availability is unverified, and the 2K LCD type is unspecified. Buyers who need documented support, spares, or a known warranty path should confirm those details before ordering.
Which model this is
This is the Longer Orange 30 resin 3D printer, US variant, SKU 22. It should not be confused with the Orange 10, Orange 4K, Orange 4K Mono, or other Longer resin printers; only Orange-30-specific material was used here. The product identifier is recorded for identity only and was not used as a source. ASIN B0831JH5LX.
Sources
Manufacturer:
- Longer Orange 30 Resin 3D Printer (product page)
- LONGER Warranty Policy
- LONGER Product Support / Software & Firmware Downloads
- Longer: Reliable & Most Affordable Desktop SLA 3D Printer (Kickstarter campaign)
Independent reviews:
Owner reports:
- No independent owner-report threads were retrieved; owner feedback is limited to the manufacturer’s on-site reviews.



