iSANMATE ASA 3D Printer Filament: problems, parts and running costs

Checked: 2026-10-25

Summary

ASA needs an enclosed printer, chamber heat around 45-60 C and thorough drying (about 60-70 C for 5-8 hours); without those, prints warp and layers split. The direct store lists about $24.99 per 1 kg spool (checked 2026-10-22), with promotional pricing around $18-20, and no replaceable parts or consumables are documented beyond the filament itself. At the direct price it is competitive against premium ASA brands; at lower promotional prices it is strong value for outdoor functional parts, provided you already own an enclosure-capable printer.

Common problems and fixes

Warping and layer splitting without an enclosure — owners report warping and layer cracking when chamber heat is lacking; the manufacturer FAQ calls for 50-60 C chamber heat and owners cite 40-60 C as ideal. Fix: print in an enclosed printer with chamber heat. Consumable, so no warranty applies. [3][6]
Moist filament degrades print quality — drying at about 60-70 C for 5-8 hours is recommended; moist filament causes stringing and clogs. Some owners print fine straight from the package, but that is the exception. [3][6]
Spool fit in some multi-material systems — some spools may not fit certain multi-material systems (e.g. Anycubic Ace Pro). Workaround: check spool dimensions before loading; no further workaround published. [6]
Color tint on non-black variants — white and some other colors may show an ivory/grayish tint; not applicable to the black variant. [6][7]
Fumes during printing — fumes present during printing; ventilation recommended. [3][6]
Stringing and clogs from cold or moist filament — possible with moist filament or printing too cold; raise nozzle temperature and dry filament. [3]

Parts and consumables

Filament spool (1 kg) — about $24.99 at the iSANMATE direct store, checked 2026-10-22; promotional pricing around $18-20. Replaced per spool as consumed; no part number published. [6][7][8][9]

Yearly running cost

No subscription or capsule lock-in. A typical owner spends on filament per project; at about $24.99 per 1 kg spool (checked 2026-10-22) or about $18-20 promotional, plus electricity for an enclosure-capable printer and a filament dryer if needed. No fixed annual figure is published because consumption depends on print volume. [6][8][9]

When it is a good buy

The iSANMATE direct store lists about $24.99 per 1 kg spool (checked 2026-10-22); bulk options exist in 4 kg and 16 kg bundles. [8][9] Promotional pricing reported by owners and guides runs about $18-20. [6][7][8]

Under $20 — strong value for outdoor functional parts. [6][7][8]
Around $24.99 — still competitive against premium ASA brands (Polymaker, Overture, Bambu Lab) per buying guides. [8][9]

Named alternatives: Polymaker, Overture and Bambu Lab premium ASA brands are the better choice when you need published test data or tighter color accuracy. [8]