Skip to content

HP OMEN 27q G2: problems, parts and running costs

Checked: 2026-11-08

Summary

The HP OMEN 27q G2 is a 27-inch 1440p IPS monitor that runs up to 180 Hz over DisplayPort, and the panel itself measures well: 3.3 ms average G2G response, 502 nits of brightness and 1222:1 contrast, with factory calibration included in the box [3]. The catch is that the advertised 1 ms GtG response and VESA DisplayHDR 400 rating did not hold up in the one instrumented test, and there is no USB-C, no USB hub, no KVM and no speakers [2][3]. Running costs are electricity only, and it is worth buying below the $339.99 MSRP rather than at it [1][3].

Common problems and fixes

Parts and consumables

Yearly running cost

Electricity is the only running cost: no filters, pods or subscriptions, and no consumables to replace. HP rates consumption at 30 W typical, 67 W maximum and 0.29 W standby [1][2], and the instrumented test measured 16 W at minimum brightness, 19 W at 120 nits and 37 W at maximum output [3]. None of the sources publish a dollar figure for yearly power, so the bill has to be worked out from your own electricity rate and hours of use.

When it is a good buy

The US HyperX store listed it at $289.99 against a $339.99 MSRP in November 2026, with free US shipping, 30-day returns and an advertised 25% code named HXDEAL25 [1]. The HP Canada store listed CAD $399.99 with a promotional CAD $329.99 in November 2026, and the MonitorsFAQ comparison listing showed 268.99 EUR [2][5]. Below $250 the G2 looks like strong value, at $289.99 it is reasonable for a calibrated 1440p 180 Hz IPS, at the $339.99 MSRP the case is thin, and above $340 it is hard to justify for an IPS panel with no USB-C and no confirmed HDR [1][2][3].

Alternatives to check before buying:

Sources