HP OMEN 27qs: problems, parts and running costs
Checked: 2026-11-09
Summary
The HP OMEN 27qs is a 27-inch QHD IPS gaming monitor with a 240 Hz refresh rate, 1 ms GtG response and very low input lag, and the recurring complaints are about its stand, its HDR mode and its HDMI ports rather than the panel. It draws about 33 W and needs no consumables, so the yearly running cost is electricity only. It is a good buy below $300, while at its $429.99 launch MSRP it faces much stiffer competition from newer high-refresh IPS panels and entry-level OLEDs.
Common problems and fixes
- Full 240 Hz needs DisplayPort — HDMI 2.0 cannot carry 2560 × 1440 at 240 Hz and caps out at 144 Hz at that resolution, so console and second-PC users see a lower refresh rate over HDMI. Connect through the DisplayPort 1.4 input to get the full rate. [1][2][3][4][5]
- No swivel on the stand — the stand adjusts height, tilt and pivot, but the panel cannot be turned left and right, so aligning it to your seat means shifting the whole monitor on the desk. A 100 × 100 mm VESA mount takes an arm if the position matters. [3][4][5]
- Weak HDR despite the badge — VESA DisplayHDR 400 certification comes with limited peak brightness and no local dimming, so HDR mode adds little over a well-tuned SDR picture. Stay in SDR with the panel brightness in the normal range if the picture looks flat. [1][3][4][5]
- IPS contrast and glow in dark rooms — static contrast sits at the IPS norm of about 1000:1, and IPS glow is noticeable in dark scenes. [1][2][3][4]
- Default colour preset clips the wide gamut — the standard preset clamps to sRGB instead of using the wider native DCI-P3 coverage of about 95% to 97%. Switch to the Gaming preset or tune the colour settings yourself for maximum saturation in SDR. [4]
- Overdrive needs a middle setting — the recommended middle levels (Level 2 or Level 4) keep motion crisp without the smearing or inverse ghosting that aggressive overdrive causes. [1][3][4][5]
- Panel longevity is unpublished — backlight failure rates and long-term panel durability over years of continuous 240 Hz operation are not published, and warranty length varies from one to three years depending on region and retailer terms. [3]
Parts and consumables
No replaceable parts or consumables reported. A DisplayPort cable, a USB upstream cable and the power cable are included in the box, and the panel accepts a standard 100 × 100 mm VESA mount. [3]
Yearly running cost
The monitor draws about 33 W in typical use and consumes nothing else: no filters, no pods, no consumable parts and no subscription. The yearly running cost is electricity only, which is a matter of a few cents a day at normal use; no other owner spending was reported. [3]
When it is a good buy
Reviewers put the good-buy line below $300, where the 27qs is exceptional value for a 1440p 240 Hz IPS. At its $429.99 launch MSRP it faces much stiffer competition from newer high-refresh IPS panels and entry-level OLEDs, so the price you pay decides the recommendation. [3][4][5]
Alternatives:
- A newer high-refresh IPS panel — the better choice if you want the 240 Hz class with more modern connectivity.
- An entry-level OLED monitor — the better choice if dark-scene contrast and HDR matter more to you than IPS-level motion handling.
- A monitor on a proper arm — the better choice if you want swivel, since the 27qs stand cannot turn sideways; its 100 × 100 mm VESA mounting takes one directly.