Flashforge ASA Filament: problems, parts and running costs
Checked: 2026-10-25
Summary
Flashforge ASA is a 1.75 mm, 1 kg ASA filament with manufacturer-listed parameters of 240-270 C nozzle and 100-120 C bed, offered in 14 colors at $29.99 for most colors ($35.99 for Multicolor Burnt Titanium). No independent test data for this exact spool was found, and no owner complaint data specific to it; the main risks are the general ASA requirements of an enclosure, high temperatures and ventilation, plus unpublished mechanical data and an unclear “ASA Variety Pack” versus single-spool packaging. [1][2][3]
Common problems and fixes
- Warping on open-frame printers — Flashforge states ASA needs a high-temperature nozzle and an enclosure to prevent warping; buyers with open-frame printers face warping risk even though the spec sheet does not state an enclosure requirement. Workaround: use an enclosure and ventilation. [3]
- Fume emission — ASA emits fumes milder than ABS but still present; ventilation is needed. [3]
- High temperature requirements — nozzle 240-270 C and bed 100-120 C; printers unable to reach these cannot use it. [1]
- Drying before printing — 80 C for 12 hours recommended; storage at room temperature to 40 C at <=20% RH sealed with desiccant. [1]
- No independent test data — no measured tensile strength, heat deflection temperature, UV aging or color-fastness data published; buyers needing verified data should prefer brands with published test reports. [1][3]
- No warranty term found — no warranty term for the filament was found on the pages read. [1][2]
- “ASA Variety Pack” wording unclear — the product page describes an “ASA Variety Pack” with Basic/Multicolor/Sparkle options while the SKU and spec table describe a single 1 kg spool; which is sold is not clarified. [1]
- SDS link missing — SDS, RoHS and REACH are claimed but no SDS document link was found on the pages read. [2]
Parts and consumables
- No replaceable parts or consumables reported. Filament is a consumable; replacement is another spool. No part number or service kit is documented. [1][2]
Yearly running cost
No subscription or capsule lock-in. Recurring costs are additional spools at $29.99 for most colors ($35.99 for Multicolor Burnt Titanium) and electricity; no price history or discount data was found. No fixed annual figure is published because consumption depends on print volume. [1]
When it is a good buy
Flashforge US store lists Flashforge ASA Filament at $29.99 for most colors and $35.99 for Multicolor Burnt Titanium (October 2026). [1]
- At $29.99 per kg — priced in line with other branded ASA filaments and below some engineering-grade ASAs; value rests on the published spec sheet, color range and certifications rather than measured performance. [1][2][3]
- Buyers needing verified mechanical or UV-aging data — prefer a brand with published test reports. [3]
Named alternatives: brands with published test reports are the better choice when verified mechanical or UV-aging data matters; general ASA guidance notes the enclosure, high-temperature and ventilation requirements apply to any brand. [3]