Skip to content
eSUN PETG Filament 1.75mm High Toughness Glossy

eSUN PETG Filament 1.75mm High Toughness Glossy

By eSUN · Filament & Resin · 3D Printing · More from eSUN

Compare all Filament & Resin side by side →

  • 1.75 mm diameter
  • 1 kg/spool
  • density 1.27 g/cm3
  • heat distortion temperature 73 C
  • extruder temperature 240-260 C

Lowest price seen
$18.99
from $18.99 at eSUN · Checked Nov 12, 2026

New
More on eBay (1)
Used, refurbished, open-box

Stores with a price are sorted lowest first; commission never changes the order. Prices are snapshots. Check the current price with the store.

From $18.99 at eSUNView at eSUN

Problems, parts and running costs

Summary

eSUN PETG 1.75mm High Toughness Glossy combines PLA-like ease of printing with ABS-like durability, offering high strength, toughness, and a natural glossy finish suitable for functional parts and outdoor projects.

Strengths

  • Balanced performance. Combines rigidity and toughness, overcoming PLA brittleness while avoiding ABS warping.
  • Excellent surface quality. Natural high gloss finish suitable for transparent and aesthetic parts.
  • Weather resistance. UV-resistant and aging-resistant, suitable for outdoor applications better than PLA.
  • Chemical resistance. Resistant to acids, alkalis, and common solvents for various environments.
  • Printing stability. Strong interlayer adhesion and low warping for high success rates on large prints.
  • Safety certifications. FDA food-contact certified and EN-71-3 toy safety certified for various applications.

Weaknesses

  • Stringing and oozing. PETG’s tendency to leave thin strands between features, requiring precise retraction tuning.
  • Hygroscopic nature. Absorbs moisture easily and must be dried at 60°C for more than 8 hours before use when stored long-term.
  • Temperature sensitivity. Requires careful temperature calibration; excessive temperatures increase oozing.
  • Bed adhesion. Can stick too aggressively to some surfaces, potentially damaging PEI coatings.
  • Cooling requirements. Over-cooling can affect interlayer adhesion while under-cooling may cause sagging.

Verified specifications

BrandeSUN
ProductPETG (High Toughness Glossy)
Diameter1.75 mm
Net weight1 kg/spool
Density1.27 g/cm³
Heat distortion temperature73°C
Extruder temperature240-260°C
Bed temperature75-90°C
Filament typeThermoplastic polyester (PETG)
Surface finishNatural glossy
CertificationsFDA food contact, REACH, RoHS, EU Food, EN-71-3 toy safety
Full research notes and sources

Moisture control and temperature management

PETG is hygroscopic and absorbs moisture from the air. Store the filament sealed with desiccant and dry at 60°C for more than 8 hours before use, especially after long storage. Moisture leads to brittle prints with bubbles.

Extruder temperature should be maintained in the 240-260°C range. Excessive temperatures increase oozing and stringing, while insufficient heat can cause poor layer bonding. Bed temperature typically needs to be 75-90°C for good adhesion.

Layer adhesion is strong, but cooling must be balanced. Use 50-100% fan speed to maintain bonding without causing sagging or poor layer adhesion.

Post-processing and repairs

PETG parts can be sanded, bonded, and polished for refined aesthetic parts. Strong interlayer adhesion allows for repairs with additional material layers.

PETG is water-resistant as a material, but FDM layer lines prevent pressure sealing without additional coating. For applications requiring water tightness, apply a sealant or coating after printing.

Running costs and ownership

The filament itself is the main cost. No special equipment is required beyond a standard 3D printer capable of 240-260°C temperatures.

Regular maintenance includes cleaning the nozzle and hotend to prevent buildup from molten PETG. Store unused filament sealed and dry to prevent moisture absorption.

Which model this is

This is eSUN PETG Filament 1.75mm High Toughness Glossy.

Sources

Manufacturer:

Independent reviews:

Owner reports:

Buying guides for this category

Compare with

See also

Related products