eSUN PETG Filament 1.75mm High Toughness Glossy: problems, parts and running costs
Checked: 2026-11-12
Summary
Common issues include stringing, oozing, and moisture absorption leading to brittle prints if stored without desiccant. Running costs depend on spool consumption, with standard spools ranging from $15 to $25 per 1 kg spool. It is a good buy at $15 to $20 per spool.
Common problems and fixes
- Stringing and oozing — reported during printing when temperature or retraction settings are uncalibrated; calibrate retraction settings and keep hotend temperature between 240°C and 260°C; warranty coverage not reported. [2]
- Moisture absorption — reported after long storage without desiccant, causing brittle prints with bubbles; dry filament at 60°C for more than 8 hours before printing; warranty coverage not reported. [1] [2]
- Aggressive bed adhesion — reported on print bed surfaces, creating a risk of damaging PEI coatings; maintain bed temperature between 75°C and 90°C and use release agents when needed; warranty coverage not reported. [2] [3]
- Nozzle buildup — reported when molten PETG accumulates during extended print jobs; clean the hotend and nozzle regularly; warranty coverage not reported. [2]
- Improper layer bonding or sagging — reported when cooling fan speed is misconfigured; set fan speed between 50% and 100% to balance layer adhesion and detail; warranty coverage not reported. [1] [2]
Parts and consumables
No replaceable parts or consumables reported.
Yearly running cost
Annual spending depends on how many spools an owner uses. There are no mandatory subscriptions, pods, or maintenance fees. Spools are priced from $15 to $25 per 1 kg spool at eSUN direct and third-party stores (November 2026).
When it is a good buy
At $15 to $20 per 1 kg spool at third-party retailers (November 2026), it offers strong value. At $21 to $25 (November 2026), it remains a solid purchase for premium color options. PLA is a better choice for lower-temperature indoor items that do not require heat resistance above 55°C to 60°C, while ABS is preferable for high-heat functional parts where an enclosure is available to prevent warping.