Skip to content
eSUN PETG Basic Filament 1.75mm High Toughness

eSUN PETG Basic Filament 1.75mm High Toughness

By eSUN · Filament & Resin · 3D Printing · More from eSUN

Compare all Filament & Resin side by side →

  • 1.75mm diameter
  • 1kg spool
  • density 1.27 g/cm3
  • heat distortion temp 73°C
  • extruder temp 240-260°C

Lowest price seen
$18.99
from $18.99 at eSUN · Checked Nov 13, 2026

New
More on eBay (1)
Used, refurbished, open-box

Stores with a price are sorted lowest first; commission never changes the order. Prices are snapshots. Check the current price with the store.

From $18.99 at eSUNView at eSUN

Summary

eSUN PETG-Basic is a 1.75 mm PETG filament sold in 1 kg spools across 16 colors, combining PLA-like printability with ABS-like toughness. Check your drying setup and tolerance for batch variation before buying.

Strengths

  • Complete mechanical datasheet published for a budget filament
  • Low manufacturer price of $18.99 per 1 kg spool
  • Good for functional parts needing toughness over PLA
  • No enclosure required and no strong odor
  • Works well on Prusa printers with generic PETG profiles

Weaknesses

  • Inconsistent batch quality reported by owners
  • Moisture sensitive; requires careful drying and storage
  • Strong bed adhesion can chip smooth sheets without release agent
  • Dimensional accuracy may be lower than premium PETG
  • Some printers can be picky with this filament

Verified specifications

BrandeSUN
Product namePETG-Basic
Diameter1.75 mm
Net weight1 kg per spool
Colors16 (BLACK, BLUE, CLEAR, GREY, RED, SILVER, WHITE, and 10 translucent variants)
Density1.27 g/cm³
Heat distortion temperature73°C
Tensile strength68.41 MPa (XY), 35.84 MPa (Z)
Flexural strength100.2 MPa (XY), 59.7 MPa (Z)
Extruder temperature240-260°C
Bed temperature75-90°C
Fan speed50-100%
Printing speed<250 mm/s
Heated bedrequired
Drying60°C for >8 hours
Full research notes and sources

Material properties and printing

eSUN PETG-Basic is marketed as combining PLA-like ease of printing with ABS-like toughness. The manufacturer publishes unusually complete mechanical specifications for a budget filament, including density 1.27 g/cm³, heat distortion 73°C, and tensile strength 68.41 MPa in the XY direction. This makes it suitable for functional parts like brackets, mounts, and organizers that need to withstand handling.

Printing requires a heated bed set to 75-90°C and nozzle temperatures between 240-260°C. The filament is hygroscopic and requires drying at 60°C for more than 8 hours before printing to avoid stringing and inconsistent surfaces. Owners report that it works well on Prusa printers using generic PETG profiles but can be more challenging on some Bambu Lab machines.

Quality and consistency

The biggest variable with eSUN PETG-Basic is batch consistency. Owner reports on Reddit are mixed—some users receive spools that print cleanly with minimal tuning, while others get spools that are moisture-laden or poorly wound and require extensive drying and calibration. This suggests that quality control varies between production runs.

Dimensional accuracy is listed as ±0.03 mm in the product metadata, but this appears copied from a PLA+ listing and is unconfirmed for PETG-Basic specifically. Premium PETG brands are noted by owners as more dimensionally consistent.

Value and pricing

At the manufacturer’s listed price of $18.99 per 1 kg spool, eSUN PETG-Basic is positioned at the budget end of the PETG market. This makes it attractive for functional prints where toughness matters more than precision. However, the value proposition depends on the buyer’s tolerance for potential tuning and drying requirements.

Compared to premium PETG brands, eSUN offers significant cost savings but requires more attention to storage and drying. For buyers who already have filament dryers and desiccant systems, this represents good value for tough utility parts.

Which model this is

This is eSUN PETG-Basic 1.75mm filament, sold in 1 kg spools across 16 colors. It should not be confused with eSUN’s regular PETG, PETG Pro, PETG-Lite, or PETG-CF/GF lines, which have different temperature windows and mechanical properties. The ASIN is B0GWH3VQCF.

Sources

Manufacturer:

Independent reviews:

Owner reports:

Buying guides for this category

Compare with

See also

Related products