Skip to content
ELEGOO Mars 4 Max Resin 3D Printer

ELEGOO Mars 4 Max Resin 3D Printer

By ELEGOO · Resin 3D Printers · 3D Printing · More from ELEGOO

Compare all Resin 3D Printers side by side →

  • 9.1-inch 6K Mono LCD
  • 5760x3600 resolution
  • 34um XY resolution
  • 195.84x122.4x150mm build volume
  • 70mm/H printing speed

Price not listed

New
More on eBay (1)
Used, refurbished, open-box

Stores with a price are sorted lowest first; commission never changes the order. Prices are snapshots. Check the current price with the store.

ELEGOO Mars 4 Max Resin 3D PrinterView at ELEGOO

Summary

The ELEGOO Mars 4 Max is a large MSLA resin printer with a 9.1-inch monochrome 6K LCD, a 195.84 × 122.4 × 150 mm build volume and a bundled ELEGOO Smart Mini Heater. It suits makers who need a sizable resin build area, but check before buying: independent print testing, owner reports, maintenance details and a verified purchase price were not available.

Strengths

  • Large 6K monochrome LCD provides a generous resolution area for detailed resin work.
  • Build volume suits larger models and small batches.
  • Bundle includes a Smart Mini Heater for temperature control around the resin.
  • Dual fans cool both the inlet and outlet of the printer.
  • Voxeldance Tango offers three print modes for different print strategies.
  • GOO is an open-source slicing format.

Weaknesses

  • No independent instrumented testing was found to confirm print quality, layer accuracy, reliability or actual print speed.
  • Detailed owner reports and community discussions were not available, leaving common failures unknown.
  • Resin tank capacity, replacement cost and other consumable prices were not documented.
  • Connectivity, noise level, power consumption and warranty terms were not specified in the available sources.
  • Calibration requirements and maintenance frequency are not detailed.
  • The available listing was marked currently unavailable, so production continuity and restocking remain unclear.

Verified specifications

ModelELEGOO Mars 4 Max MSLA resin 3D printer
Display9.1-inch monochrome LCD
Resolution5760 × 3600 (6K); XY resolution 34 μm
Build volume195.84 × 122.4 × 150 mm (7.71 × 4.81 × 5.9 inches)
Light sourceCOB+ refractive 405 nm
Print speedUp to 70 mm/h
LCD protection9H hardness tempered glass
CoolingDouble fan system with inlet and outlet fans
SoftwareVoxeldance Tango with three print modes: static, dynamic smooth and dynamic high-speed
Slicing formatELEGOO GOO, an open-source format
IncludedELEGOO Smart Mini Heater with intelligent temperature control, air filtration and a 10,000 R/min high-speed fan
Compatible materialsVarious resin types
Full research notes and sources

Resolution and print area

The Mars 4 Max uses a 9.1-inch monochrome LCD with 5760 × 3600 pixels and 34 μm XY resolution. Its build volume is 195.84 × 122.4 × 150 mm, which gives you considerably more room than a compact resin printer.

The 6K figure describes the LCD pixel count. It does not prove that every printed part will show more visible detail, because resin, exposure, focusing and the rest of the print process also determine the result.

Light source and cooling

ELEGOO specifies a COB+ refractive 405 nm light source and a double fan arrangement for cooling. The Smart Mini Heater included in the bundle has intelligent temperature control, air filtration and a 10,000 R/min fan.

These features address temperature and heat management around the printer, but no independent test was found showing how well they work during long prints.

Software and print modes

Voxeldance Tango provides static, dynamic smooth and dynamic high-speed modes. The printer supports ELEGOO’s open-source GOO slicing format, so you are not limited to a proprietary closed workflow.

The available research did not document connectivity options such as USB, Wi-Fi or Ethernet. Confirm the workflow you need before buying.

Ownership costs and upkeep

Resin, electricity, possible replacement parts and post-processing equipment for washing and curing are the main ownership costs. The research does not provide prices for those items and does not state the resin tank capacity or replacement cost, so the ongoing cost cannot be calculated from the available information.

Expect basic resin-printer upkeep, including cleaning and resin handling. The sources do not give a maintenance schedule, calibration requirements or a documented service and repair process.

Is it worth it?

The specification sheet is strong for a large resin printer: a 9.1-inch 6K monochrome LCD, a generous build volume, three print modes and a heater included in the bundle. The missing information is more important for a purchase decision: there is no independent validation of print quality or speed, no detailed owner feedback, and no documented consumable pricing or warranty.

Treat the quoted 70 mm/h speed as a maximum under ideal conditions, not a typical print speed. If you need a large resin build area and can verify the current price and support terms with the seller, the hardware is worth evaluating; without those details, there is not enough evidence to judge its value.

Which model this is

The bundle uses ASIN B0D9LQ1W7K. It is an MSLA resin printer, not a filament printer.

Sources

Manufacturer:

Buying guides for this category

Compare with

See also

Related products