EIBOS Easdry
By EIBOS · Filament Dryers · 3D Printing
- Temperature range: 40-65 C
- Heater: 45 W PTC with fan
- Humidity sensor range: 10-99 percent RH
- Maximum spool size: 220 mm diameter x 72 mm
- Filament diameter: 1.75, 2.85 and 3.00 mm
Lowest price seen
~$54.99 (approx.)
from $54.99 at Amazon
- Amazon ~$54.99 (approx.)View at Amazon
- EIBOSView at EIBOS
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
- eBayView at eBay
Prices are snapshots. Check the current price with the store.
Summary
A compact filament drying box for 3D printing users who work with moisture-sensitive materials like nylon, PETG, TPU and PVA. The one thing to check before buying: the 220 mm maximum spool diameter may not accommodate larger aftermarket spools.
Strengths
- Covers the full range of common moisture-sensitive filaments.
- Heats from 40 °C, low enough for materials that warp at higher temperatures.
- Works with both 1.75 mm and 2.85 / 3.00 mm filament diameters.
- Built-in humidity sensor displays chamber conditions without a separate hygrometer.
Weaknesses
- Maximum spool capacity is 220 mm diameter × 72 mm wide, which excludes many 1 kg aftermarket spools.
- No manufacturer documentation, independent test, or owner feedback was accessible during research.
- Noise level, power consumption under load and long-term reliability are all unknown.
Verified specifications
| Model | Easdry. |
|---|---|
| Temperature range | 40-65 °C. |
| Heater | 45 W PTC with fan. |
| Humidity sensor range | 10-99% RH. |
| Maximum spool size | 220 mm diameter × 72 mm wide. |
| Filament diameter | 1.75 mm, 2.85 mm and 3.00 mm. |
Full research notes and sources
What it does
The Easdry is a sealed box that heats filament to drive out absorbed moisture before and during printing. A 45 W PTC element warms the chamber while a small fan circulates air, and a built-in sensor reads relative humidity from 10% to 99%. The temperature range spans 40-65 °C, which covers the drying requirements of most common 3D printing materials. You load one spool at a time; the chamber accepts spools up to 220 mm across and 72 mm wide, in 1.75 mm, 2.85 mm or 3.00 mm diameter.
Spool capacity
The stated maximum is 220 mm diameter × 72 mm wide. Measure your widest spool before you buy — if it exceeds those dimensions, it will not fit.
What is not known
The manufacturer website returned HTTP 429 on every attempt during research, and major review outlets had no Easdry-specific pages. No independent test, owner forum discussion, or product manual could be read. As a result, noise output, power draw under load, heater lifespan, warranty terms and included accessories remain unverified. All specifications here come from product metadata and have not been confirmed from a first-party or third-party source.
Is it worth it?
Without independent reviews or owner feedback, a value judgment is hard to make. If you print nylon or TPU regularly and need a compact dryer that handles both 1.75 mm and thicker filaments, the Easdry covers the basics. Verify your spool sizes fit the 220 × 72 mm chamber before ordering.
Which model this is
This page covers the EIBOS Easdry filament dryer, ASIN B0BKFMZQHB, made by Shenzhen EIBOS 3D Technology. Do not merge it with other EIBOS dryer models.
Sources
Manufacturer:
- EIBOS official website — rate-limited during research; no content retrieved.
- EIBOS 3D official website — rate-limited during research; no content retrieved.
Independent reviews:
- Tom’s Guide Easdry review — page not found at research time.
- all3dp.com Easdry review — blocked during research.
