Skip to content
Creality Soleyin Basic PETG 3D Printing Filament 1kg - Milk Tea Brown

Creality Soleyin Basic PETG 3D Printing Filament 1kg - Milk Tea Brown

By Creality · Filament & Resin · 3D Printing · More from Creality

  • 1.75 mm filament diameter
  • ±0.02 mm dimensional accuracy
  • 1 kg spool (2.2 lb)
  • 45 MPa tensile strength
  • 71.77 °C glass transition temperature

Price not listed

New
Used, refurbished, open-box

Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.

Problems, parts and running costs

Summary

Check your printer’s temperature range and your storage setup before buying: published nozzle and bed temperatures vary by retailer, and PETG absorbs moisture.

Strengths

  • 12 colors including Milk Tea Brown for functional parts and household items.
  • $11.99 on the Creality US store against a $16.99 list price.
  • Bulk pricing down to $8.99 at 20 spools for print farms.
  • No enclosed chamber required for most prints.
  • Spools carry Creality CFS (RFID/NFC) tags for multi-color boxes.
  • Good layer adhesion and low warping reported in retailer descriptions.

Weaknesses

  • Creality publishes no canonical spec sheet; temperature and speed ranges vary by retailer.
  • PETG-typical stringing and moisture sensitivity; dry before use and store sealed.
  • Paper spools are not recommended for CFS or other multi-color boxes.
  • No instrumented third-party test of this exact filament exists.
  • Tensile strength (45 MPa) and glass transition temperature (71.77 C) could not be verified from a manufacturer datasheet.
  • Color name versus actual shade may vary by monitor.

Verified specifications

MaterialPETG (polyethylene terephthalate glycol-modified).
Diameter1.75 mm with +/-0.02 mm tolerance.
Net weight1 kg (1000 g) per spool; 1 kg spools only.
Colors12, including Milk Tea Brown.
Milk Tea Brownmeasured hex #CCAE88 (3D Filament Profiles); HueForge transmission distance 5.8 (1 vote).
Nozzle temperature230-250 C typical; published ranges vary 210-260 C.
Bed temperature60-85 C typical; published ranges vary 60-90 C.
Print speed30-300 mm/s depending on source; 3D Fusion recommends 40-80 mm/s.
Cooling fan20-50%.
Density1.23-1.24 g/cm3.
Drying60-70 C for 4-6 h before printing, then keep sealed.
RFID/NFCCreality CFS tags on spools.
Spoolrecyclable cardboard; empty spool about 290 g.
Printersmost 1.75 mm FDM/FFF printers; no enclosed chamber normally required.
Dimensionspacking 210 x 210 x 70 mm; gross weight 1.29 kg; spool about 210 x 70 mm.
Warrantyup to 12 months against manufacturing defects.
Full research notes and sources

Temperature and print settings

Published nozzle temperatures run 210-260 C and bed temperatures 60-90 C depending on the retailer, with 230-250 C and 60-85 C the most common typical ranges. Print speed recommendations span 30-300 mm/s, and 3D Fusion suggests 40-80 mm/s with 20-50% cooling fan. Because Creality publishes no spec sheet for this line, treat any single number as a starting point and tune for your printer. Dry the filament at 60-70 C for 4-6 h if it has absorbed moisture.

Moisture, storage and spool

PETG absorbs moisture, so keep spools sealed with desiccant and dry before use when prints show stringing or poor layer adhesion. The spool is recyclable cardboard and weighs about 290 g empty; handle it to avoid crushing. Creality warns that paper-spool variants are not recommended for CFS or other multi-color boxes, so choose the RFID plastic spool version for multi-color printing.

Color: Milk Tea Brown

Milk Tea Brown is a light tan shade; 3D Filament Profiles lists a measured hex of #CCAE88 and a HueForge transmission distance of 5.8 from one vote. Minor color variation by monitor is noted by retailers, and the RGB value reported by FilaScope appears inconsistent and is not relied on.

Is it worth it?

At about $12 per kg on the Creality US store, with bulk tiers down to $8.99 at 20 spools, Soleyin Basic PETG is an entry-priced functional PETG with 12 colors and CFS tag support. It suits brackets, enclosures and prototypes where toughness and layer adhesion matter more than speed. For speed-focused work, Creality’s own Hyper PETG is the alternative. Comparable entry PETGs from Overture, eSUN and SUNLU compete near this price for single spools, so the premium is justified mainly by color match or bulk discount.

Which model this is

This page covers Creality Soleyin Basic PETG, 1 kg, color Milk Tea Brown, 1.75 mm, SKU 3301030165, made by Shenzhen Creality 3D Technology Co., Ltd. and sold under the Soleyin line. Do not confuse it with Creality CR-PETG, Hyper PETG, Soleyin Ultra PLA, or other Creality filament lines; Soleyin Basic PETG is a distinct product handle on the Creality store.

Sources

Manufacturer:

Independent reviews:

Owner reports:

Buying guides for this category

Compare with

See also

Related products