Creality Pictor Film High-Speed Release Film: problems, parts and running costs

Checked: 2026-10-17

Summary

Pictor Film is Creality’s own 0.3 mm composite release film for the Halot-Mage, Halot-Mage Pro and Halot-Mage S 10-inch resin printers, sold as the high-speed option and claimed to cut peel force by 35% with no independent test verifying it. It is a consumable: sheets wear over months of printing and cleaning and are replaced when dented, deformed or pierced. A 3pcs pack at $71.99 (Creality US store, October 2026) works out to about $24 per sheet, mid-range for 10-inch release films.

Common problems and fixes

Film wears and can leak the vat — release films develop streaks, stretching and holes over months of printing and cleaning; replace when dented, deformed or pierced to avoid vat leaks, and clean with isopropyl alcohol after prints. [6][7]
Prints stick to the film — a Halot Mage owner struggled with prints sticking to the stock film despite replacing it; release and calibration issues are common on these printers regardless of film type. [9]
Re-leveling after a film change is undocumented — a forum owner asked whether re-leveling is needed after switching to Pictor film; no answer was found in the sources. [9]
Composite films can mark large flat surfaces — ACF-type films can leave a faint textured look on large flat surfaces; a category observation, not Pictor-specific. [10]

Warranty: the Creality US product page carries “Up to 12-Month Warranty” and “14-Day Return & Refund” banners; the exact terms for the film itself are not detailed. [2]

Parts and consumables

Pictor Film sheet (286x198x0.3mm, 3-layer composite) — the consumable itself; Creality US store, October 2026: 1pcs $25.91 (sold out at check time), 3pcs $71.99, volume discounts down to $55.99 per unit; no fixed replacement interval is published. [2]
Regular FEP film (286x198x0.15mm, 2pc/5pc packs) — Creality’s separate standard film for the same printers, only suitable for regular-speed printing. [3][1]

The store listing includes film sheets only; no vat, tools or frame. [2]

Yearly running cost

No published lifespan in prints or layers and no fixed replacement interval, so a typical yearly total cannot be computed. At the 3pcs price of $71.99 (about $24 per sheet, Creality US store, October 2026), each replacement costs about $24, and the sources describe wear building over months of printing and cleaning. [2][6][7] For comparison, third-party films cost less per sheet: UniFormation nFEP 3pcs at $31.26 (about $10.42 per sheet), Anycubic ACF 2pcs at $43.18 (about $21.59 per sheet), Phrozen FEP from $11. [12][11][13]

When it is a good buy

Creality US store, October 2026: 1pcs $25.91 (sold out), 3pcs $71.99 — the 3pcs pack is the better per-sheet value at about $24 versus $25.91. [2]
3DMax (NZ) lists the film at $59.37-62.50; the currency is not stated on the page, likely NZD. [8]
3Idea (India) lists the 3pcs pack at ₹6,204 (MRP ₹14,188). [5]
UniFormation nFEP (3pcs $31.26, about $10.42 per sheet) — the better choice when cost per sheet matters more than OEM fit. [12]
Anycubic ACF high-speed film (2pcs $43.18, about $21.59 per sheet) — comparable per-sheet price and the same high-speed composite category as Pictor. [11]
Phrozen FEP (from $11) — budget option for regular-speed printing. [13]

Buy the OEM Pictor film for exact vat fit and the high-speed claim; buy third-party nFEP to save money per sheet.