Skip to content
Creality K1 3D Printer

Creality K1 3D Printer

By Creality · 3D Printers · 3D Printing · More from Creality

Compare all 3D Printers side by side →

  • 600 mm/s maximum print speed
  • 20,000 mm/s² acceleration
  • 220 x 220 x 250 mm build volume
  • 4.3-inch color LCD touchscreen
  • 300 °C maximum hotend temperature

Price not listed

New
More on eBay (1)
Used, refurbished, open-box

Stores with a price are sorted lowest first; commission never changes the order. Prices are snapshots. Check the current price with the store.

Creality K1 3D PrinterView at Creality

Problems, parts and running costs

Summary

The Creality K1 delivers genuine high-speed CoreXY printing at exceptional value ($399-449), combining an enclosed design, auto bed leveling, and direct drive extrusion for users who prioritize speed over premium polish.

Strengths

  • Genuine high-speed printing delivers 50-70% faster print times compared to traditional printers
  • CoreXY motion system provides excellent stability at high speeds
  • Fully enclosed design makes ABS/ASA printing practical and reduces noise
  • Direct drive extruder handles flexible filaments well
  • Auto bed leveling works reliably for most users
  • Exceptional value at current pricing ($399-449) undercutting comparable CoreXY printers

Weaknesses

  • Early units had quality control issues including inconsistent bed leveling and loose door hinges (mostly resolved through hardware revisions)
  • Rear-mounted filament spool holder requires printer repositioning for access
  • PEI build surface may require glue assistance for certain materials and regular cleaning
  • Print quality degrades noticeably at speeds above 300-350 mm/s with increased ringing
  • Software limitations in Creality Print for advanced users
  • Requires more regular attention and occasional calibration than premium alternatives

Verified specifications

Build volume220 × 220 × 250 mm (8.66 × 8.66 × 9.84 inches)
Print speedUp to 600 mm/s maximum; 200-300 mm/s typical for quality prints
Acceleration20,000 mm/s²
Hotend temperatureMaximum 300°C (ceramic heater, rapid heating to 200°C in 40s)
Bed temperatureMaximum 100°C (aluminum alloy heatbed with PEI coating)
Layer resolution0.05-0.4 mm (50-400 microns)
Nozzle0.4 mm hardened steel (standard); compatible with E3D Obxidian
ExtruderDirect drive, dual-gear system with 50N extrusion force
Motion systemCoreXY with G-sensor for resonance compensation
FrameDie-cast aluminum alloy unibody construction
Build surfacePEI-coated flexible magnetic steel sheet
ConnectivityWiFi, USB drive, LAN, Creality Cloud
Display4.3-inch color touchscreen
SensorsAuto-leveling via strain sensors, filament runout, optional AI camera & LiDAR
Weight12.5 kg
SoftwareCreality Print 4.3; compatible with PrusaSlicer/Cura

Parts, consumables and accessories

0.4 mm hardened steel nozzle
Replace: as needed

no nozzle price was reported; owners may need to replace it depending on usage and materials, and Creality offers replacement nozzles.

  • Compatible K1 Hotend Kit for Creality K1 K1 Max K1C 3D Printer Extruder with Nozzle $43.99View at eBay
  • Compatible 3D Printer Nozzle Kit, 0.4mm Stainless Steel for Creality K1 Ender 3 V3 KE CR 10 $20.86View at eBay
PEI-coated flexible magnetic steel build plate
Replace: as needed

no build-plate price was reported; Creality offers replacement build plates, but the research does not give an owner replacement interval.

  • Compatible Creality K1 Max 3D Printer Smooth PEI Build Plate 315*310mm for Ender-3 V3 Plus $16View at eBay
  • Compatible Creality K1 PEI Build Plate Powder Coating Magnetic for 235x235mm 3D Printer $30.43View at eBay
PLA, PETG and TPU filament
Replace: as needed

no filament prices were reported; these are the printer's primary recurring materials.

  • Compatible 4KG Creality Hyper PLA Filament 1.75mm 1KG 3D PLA Filament for K1/K1 Max/Ender $49.99View at eBay
  • Compatible 4KG Creality Hyper PLA Filament 1.75mm 1KG 3D PLA Filament for K1/K1 Max/Ender $42.99View at eBay
Full research notes and sources

Speed and performance

At these speeds, the K1 delivers excellent results—prints that rival or exceed quality from slower machines while completing in a fraction of the time. The CoreXY motion system is the secret sauce, enabling the rapid acceleration and direction changes that make this speed possible.

Independent testing confirms the K1 produces “decent quality prints” with excellent dimensional accuracy. The 3D Benchy test completed in 13-16 minutes using Creality’s pre-sliced file and Hyper PLA filament, though user-sliced files typically take 30-35 minutes. Kickstarter-Autodesk “torture test” scored 25/30 points, with the main limitation being fine flow control and stringing between spires.

Installation and setup

Installation is straightforward. The printer arrives approximately 90% assembled with minimal setup required—typically just attaching the touchscreen, connecting power, and loading filament. The process takes 30-45 minutes to get printing, which is a major advantage over traditional Creality printers.

Users should note that the CoreXY design requires the printer to be positioned away from walls due to the rear-mounted filament spool holder. The enclosed chamber helps with ABS/ASA materials but doesn’t achieve high ambient temperatures (typically max 45-50°C).

Running costs and ownership

The K1 has reasonable ownership costs. Recurring expenses include filament (PLA/PETG/TPU primarily), occasional replacement nozzles, glue sticks for PEI surface maintenance, and potentially optional accessories like the AI camera ($32). At current pricing ($399-449), it represents exceptional value, undercutting comparable enclosed CoreXY printers by $200-300.

The printer requires regular maintenance including cleaning the PEI build surface with isopropyl alcohol, periodic hotend maintenance, and occasional belt tension checks. Warranty is typically 1 year from purchase date, and Creality offers replacement parts including nozzles, build plates, and extruder components.

Which model this is

This is the Creality K1, the base model in Creality’s K1 Series of 3D printers. It should not be confused with the K1 Max (300×300×300mm), K1 Plus, K1 SE, or other K-series variants that have different specifications or target different market segments. The base K1 has a 220×220×250mm build volume and is identified by ASIN B0CDRMT4FR.

Sources

Manufacturer:

Independent reviews:

Buying guides for this category

Compare with

See also

Related products