Creality Hyper Series PLA Carbon Fibre 3D Printing Filament 1kg - Ochre: problems, parts and running costs

Checked: 2026-10-26

Summary

Creality Hyper PLA-CF (Ochre) is a 4%-carbon-fiber PLA whose reported problems are PEI over-adhesion with top-layer delamination, extrusion friction through PTFE tubing on K1 printers, first-layer failures with a 0.6 mm nozzle, moisture sensitivity and brass-nozzle wear. A 1 kg spool is listed at $18.99 against a $34.25 compare-at price at the Creality US store in October 2026, or $24.99 via SimplyPrint. It is a good buy at $20 or less for stiff, matte parts on a fast printer with a hardened nozzle and dry storage.

Common problems and fixes

PEI build-plate over-adhesion — owners report the plate grips too hard, with top layers sticking to the plate and delaminating; one Reddit user’s first print with default Creality Print settings was fine apart from build-plate adhesion. Clean the plate with isopropyl alcohol before printing and tune first-layer settings. [9]
Extrusion friction through PTFE tubing — on K1-series printers the filament drags through Teflon tubing and fails to extrude. [7]
Brass-nozzle wear — the filament is abrasive and wears brass nozzles; a hardened steel nozzle is required. [4][5]
AMS feeding and winding issues — reported on a BambuLab AMS. [10]
Parts printing on the standard K1 Max build plate — problems with individual parts are reported. [9]

Parts and consumables

Hyper PLA-CF 1 kg spool, Ochre (SKU 3301060019, variant id 51732429046125) — $18.99 against a $34.25 compare-at price at the Creality US store in October 2026; $24.99 via SimplyPrint checked 2026-10-25. One spool, no accessories and no nozzle included. [1][11]
Hardened steel nozzle — required because the filament is abrasive; one owner prints with a 0.4 mm hardened nozzle at 220 C nozzle, 50-60 C bed, 250 mm/s on smooth PEI. [4][5][6]
Dry box or desiccant — needed for storage after opening; the TDS calls for a dry, ventilated place away from heat, sun and humidity. [3]

Yearly running cost

The only running cost is the filament itself, plus the printer’s electricity and a one-time hardened nozzle and dry box if not already owned. A 1 kg spool is $18.99 at the Creality US store in October 2026 and $24.99 via SimplyPrint checked 2026-10-25. There are no subscriptions or other consumables. No source quantifies how much filament a typical owner prints in a year, so an annual total cannot be computed from the available data.

When it is a good buy

Price thresholds: at $20 or less the filament is good value for users with a fast printer and a hardened nozzle who need stiff, matte CF-PLA parts; from $21 to $30 it is fair; above $30 the value is weak unless a specific color is required. The Creality US store lists $18.99 in October 2026 and SimplyPrint lists $24.99 checked 2026-10-25.

Alternatives: for load-bearing or tight-tolerance parts, a non-carbon-fiber PLA or PETG is the better choice, since this filament’s advantage is stiffness and matte finish rather than toughness and its dimensional tolerance is only listed by third parties at +/-0.03 mm. For AMS or CFS users, the RFID plastic spool version of the same filament is the better choice over the paper spool.