Creality Hyper PLA RFID Luminous Pink: problems, parts and running costs

Checked: 2026-10-26

Summary

This is a 1 kg glow-in-the-dark PLA spool with an RFID tag for Creality’s CFS, sold around $19.99, and the recurring issues are the same ones that affect glow PLA generally: brittleness, brass-nozzle wear, fast glow decay and RFID tags that do not always register on Creality machines. A typical owner who prints a few kilograms a year spends roughly $20 to $100 on filament, plus $23.75 for a hardened nozzle and $11.58 for a PTFE tube if needed, and RFID only adds value on supported Creality printers.

Common problems and fixes

Glow-in-the-dark PLA is brittle and snaps easily — owners in community threads call glow PLA the most brittle filament they have tried, with prints and filament breaking during handling and feeding. Workarounds are slower printing, dry storage and avoiding thin features; no warranty relief is documented because filament is a consumable. [5][6]
Glow pigment wears brass nozzles — CNC Kitchen testing shows filled pigments differ sharply in abrasion from ordinary PLA, with wear of 0.18 mm per 100 g for one brand and nearly 0.5 mm per 100 g for colorFabb glowFill, and owners report brass nozzles wearing within about a spool. Fix is a hardened steel nozzle; Creality’s $23.75 hardened-steel nozzle kit is listed for classic MK8-style Ender and CR-10 machines, not necessarily K2, Hi or Unicorn hotends. [9][10][5][6]
RFID tag present but not auto-recognized — in December 2025-January 2026 a Creality K2 owner reported several new Hyper Luminous tagged spools loaded but none populated the material profile, while older white Hyper PLA recognized normally; another buyer corroborated three green and one blue spool not reporting. Workaround is entering the material manually, and the cause may be a missing materials-database entry. [7]
CFS feeding and extrusion problems on the luminous family — an August-September 2026 Creality forum thread reports a K2 Plus plus CFS owner whose Hyper Luminous Blue PLA failed to retract and sometimes moved through a print without extruding, persisting after PTFE replacement, gear cleaning and repositioning; other users reported mid-print loss of extrusion. Diagnose with a clean nozzle, a direct feed path and dry material before blaming the batch. [8]
PTFE feed-path wear — owners report gouged PTFE guide tubes and filament paths with glow PLA, and Creality’s CFS maintenance guide instructs inspecting and replacing worn PTFE. No measured kilograms-to-replacement interval exists for this SKU; inspect tube ends and high-bend sections if retract resistance rises. [8][10][17]
No independent test of this exact filament — no instrumented test of Creality Hyper PLA RFID Luminous Pink (SKU 3301010539) was found; available evidence is general glow-PLA testing and retailer data tables. Buy on the understanding that glow strength, layer adhesion and nozzle wear for this SKU are unverified. [3][5][6][7][8][9][10][11]
Mechanical values are retailer-table data, not a verified TDS — PB Tech’s table lists density 1.25 g/cm3, tensile strength 37 MPa, elongation 24% and bending strength 76 MPa, but no exact-SKU manufacturer technical data sheet with test methods was located. Do not use these as engineering allowables or assume generic Hyper PLA performance applies. [4]

Parts and consumables

Creality Hyper PLA RFID Luminous Pink, 1.75 mm, 1 kg (SKU 3301010539, EAN 6977905743742) — the consumable itself; official US price $19.99, with bulk tiers of $16.99 at 5 spools, $15.99 at 10 and $14.99 at 20 if the order qualifies. Replenish per grams consumed, purge material, failed parts and supports. [1][3][4]
Hardened steel nozzle — recommended for regular glow-PLA use; Creality’s high-end hardened-steel nozzle kit is $23.75 and is listed for classic MK8-style Ender and CR-10 machines, so owners of K2, Hi or Unicorn hotends need their own exact-model wear-resistant nozzle and its verified price. Replace on observed bore deformation or calibration drift, not on a fixed schedule. [10][12][16]
Low-resistance PTFE tube, 1 m — $11.58 at Creality’s US store; a possible feed-path maintenance part for printers that use compatible-diameter PTFE. Replace if abraded, crushed or if inspection indicates wear; no measured luminous-pink usage threshold exists. [11][17]
Storage and drying supplies — containers, desiccant and a dryer are optional; no SKU-specific validated drying temperature or time was found, so do not apply another brand’s 55 C recipe to this filament. [4][9]

Yearly running cost

Filament only, at the checked official single-roll asking price: 1 kg per year is $19.99, 3 kg is $59.97 and 5 kg is $99.95 if bought singly without multi-buy reduction, returns, shipping or tax; a qualifying five-roll order would be $84.95 at the shown $16.99 tier. These are transparent offer calculations, not typical household use. Optional wear parts, if one compatible classic Ender owner buys one $23.75 hardened-steel nozzle kit and one $19.99 reel, total $43.74 before tax and shipping, and adding one $11.58 PTFE tube segment raises the example to $55.32, but no data establishes that each kilogram consumes one tube or one kit. Electricity cannot be added: printing kWh depends on the printer, bed, print duration, number of CFS swaps, drying and local rate, and no standardized exact pink cost per print or failure rate was reported. No recurring subscription is needed; the reel prints with manually entered PLA settings if RFID is not recognized. [1][11][12][16][17]

When it is a good buy

Creality US store, Hyper PLA RFID Luminous 1 kg: $19.99, displayed compare-at $28.90, with Pink among four color options; bulk tiers of $16.99 at 5, $15.99 at 10 and $14.99 at 20 spools if the order qualifies. The crossed-out $28.90 is not evidence of a genuine previous widely paid price. [1]
Creality live exclusive, Hyper Luminous 1 kg: $18.79 including a named Pink option, but showed sold out in the retrieved page. [18]
Creality VIP Mall: $28.90 marketing header plus a $0.00 placeholder, defaulting to Yellow; not a confirmed buyable Pink US checkout. [1]
SimplyPrint catalog, official manufacturer US-facing offer: $19.99 checked October 13, 2026. [1]
PB Tech Australia, exact SKU 3301010539: AU$37.84 including local GST on its Australian site; no US delivery total established. [4]
Polymaker Panchroma Luminous Pink, 1 kg: $24.99, with the live variant backordered. [14][14]
Regular Creality Hyper PLA RFID (not luminous): about $21.00 per kg; ordinary Creality Hyper PLA (neither RFID nor luminous): $19.99 per kg. Different materials, useful only to judge whether glow justifies extra print-processing effort. [1]

Editorial thresholds:

At or below $16 per kg: strong value if nozzle and feed path already handle glow additives, but no verified eligible single-roll US offer at that price was found. [1]
$17 to $20 per kg: good price zone, with the $19.99 official listing as the benchmark, subject to actual Pink stock. [1][1]
$21 to $25 per kg: compare Polymaker Panchroma Luminous Pink at $24.99, which documents a hardened-nozzle requirement, 190-230 C nozzle, 25-60 C bed, max 200 mm/s and 55 C for 6 h drying if wet, though live stock is not confirmed. [14]
Above $25 per kg: weak against the checked official $19.99 ask unless local pickup, traceable batch or warranty, or a unique effect justifies the premium. [1]

Named alternatives:

Polymaker Panchroma Luminous Pink PLA, 1.75 mm, 1 kg, $24.99: better if its documented hardened-nozzle requirement, temperature window and maintenance guidance are preferred and stock is confirmed; its numbers are for Polymaker, not validations of the Creality material. [14][15]
Polymaker Panchroma Glow PLA (Glow Green or Glow Blue), 1.75 mm, 1 kg, $24.99, shown unavailable: better if glowing effect matters more than daytime pink, but it is not a color-identical alternative and still requires a hardened nozzle. [15]
Creality regular Hyper PLA RFID, 1.75 mm, 1 kg, about $21.00: better for structural or regular printing, speed and CFS recognition when a glowing finish is unnecessary. [1]