Creality Hyper PLA RFID 3D Printing Filament 1kg White: problems, parts and running costs
Checked: 2026-10-24
Summary
A 1.75 mm PLA filament sold in 1 kg spools with an embedded RFID chip for Creality’s CFS. The RFID feature only pays off on Creality machines that can read the tag, print and bed temperatures are not published on the store page, and no independent test of this filament exists. At the Creality store sale price of $21.00 for 1 kg it is a reasonable high-speed PLA; at the $31.90 regular price the value weakens without validation. [1][2][3][4]
Common problems and fixes
- RFID tag does nothing without Creality CFS — auto-detection, settings and usage tracking only work on Creality machines equipped with CFS; on other printers the tag is unused. No workaround; confirm CFS support before buying. [1]
- Print and bed temperatures are not published — the readable store page gives no temperature range despite the “varied temps/speeds” claim, so buyers must rely on the spool label. No fix documented. [1]
- Dimensional accuracy is unverified — the +/-0.03 mm figure is associated with the Amazon listing and could not be verified from a other-store source. No independent test exists to confirm it. [1]
- No independent test data — no instrumented test of this filament was found on established outlets, and Tom’s Hardware’s filament roundup does not include it. The “10x Faster” and “stronger than ABS” claims are marketing copy with no supporting data on the page. [2][3]
- No owner discussions found — no threads for this exact filament were found on the Creality Community Forum, so real-world failure modes such as tangling, stringing or warping are undocumented. [4]
- Moisture storage is not documented — the store page does not state storage guidance; standard PLA moisture sensitivity applies generally. [1]
- RFID chip durability is undocumented — whether the embedded chip survives normal spool handling and storage is not addressed. [1]
Parts and consumables
No replaceable parts or consumables reported. The filament is a consumable spool; no spool, chip or packaging part is sold as a replacement in the sources. [1]
Yearly running cost
Not enough data for a dollar figure. Filament is a consumable and cost per print depends on print volume and waste; no subscription, capsule or lock-in is documented, and no power or part prices are published. The only documented outlay is the filament itself at $21.00 sale or $31.90 regular per 1 kg spool on the Creality store, with tiered pricing of $17.85 each for five spools, $16.80 each for ten and $15.75 each for twenty. [1]
When it is a good buy
- Creality store sale price of $21.00 for 1 kg (October 2026) — reasonable for a high-speed PLA if you own Creality CFS hardware that can read the tag. [1]
- Creality store regular price of $31.90 for 1 kg (October 2026) — the value weakens, since no independent data supports a premium over non-RFID Hyper PLA or competing high-speed PLA. [1][2][3]
- Tiered pricing (October 2026) — five spools at $17.85 each, ten at $16.80 each, twenty at $15.75 each lowers the per-spool cost for multi-spool buyers. [1]
- Named alternatives — non-RFID Creality Hyper PLA when the RFID tag would go unused; brands covered in Tom’s Hardware’s filament roundup when independent test data matters. [2][3]