Skip to content
Creality Hyper ABS 1.75mm 3D Printing Filament 1kg - Black

Creality Hyper ABS 1.75mm 3D Printing Filament 1kg - Black

By Creality · Filament & Resin · 3D Printing · More from Creality

Compare all Filament & Resin side by side →

  • 1.75mm diameter
  • 1kg spool
  • up to 350mm/s print speed
  • 19kJ/m2 impact strength
  • 176F temperature resistance

Lowest price seen
$18.99
from $18.99 at Creality · Checked Nov 6, 2026

New
More on eBay (1)
Used, refurbished, open-box

Stores with a price are sorted lowest first; commission never changes the order. Prices are snapshots. Check the current price with the store.

From $18.99 at CrealityView at Creality

Problems, parts and running costs

Summary

A black 1.75mm ABS filament for FDM printers that need to print functional parts faster than standard ABS allows. Before you buy, check that your printer can hold an enclosed chamber and that you can print with styrene fumes somewhere ventilated.

Strengths

  • Prints up to 350 mm/s on high-speed FDM hardware.
  • Flows more easily than standard ABS, which cuts print time on flow-limited layers.
  • Shrinks less than conventional ABS, so warping is less of a fight.
  • Heat distortion temperature of 80°C suits warm functional parts.
  • Sold around $18.99 at the Creality store and $22.99 at Abt, with bulk tiers for 5+ or 10+ rolls.
  • Wider temperature window for the hotend than many ABS makers specify.

Weaknesses

  • The 350 mm/s claim needs a high-speed printer and firmware tuning, such as a Creality K1 series or Ender 3 V3.
  • ABS still gives off styrene fumes, so a ventilated room and enclosure matter.
  • Enclosure is not optional in practice even with reduced warping.
  • No independent instrumented test reports exist for this filament, so the mechanical numbers come from the maker.
  • Retailer specification sheets carry a Proposition 65 warning for cancer and reproductive harm.
  • Warping and layer adhesion still need work on printers without an enclosed chamber.

Verified specifications

Diameter1.75 ± 0.05 mm.
Net weight1.0 kg (about 2.3 lbs); package weight about 3 lbs.
Spool package dimensionsabout 3 × 9 × 10 inches.
Extruder temperature230°C – 270°C.
Hotbed temperature75°C – 95°C.
Print speedup to 350 mm/s.
Impact strength19 kJ/m².
Tensile strength30.4 ± 0.6 MPa.
Bending strength48.1 ± 0.2 MPa.
Heat distortion temperature80°C.
MaterialABS polymer with lower residual monomer content and fewer thermal decomposition volatiles than standard ABS grades.
Manufacturer part number3301020042; UPC 6971636403579.
Warrantyup to 12 months on materials through the Creality store; the EU store lists up to 24 months.
In the boxone 1 kg spool of filament.
Full research notes and sources

Printing temperatures and hardware

Hotend from 230°C to 270°C, hotbed from 75°C to 95°C. Those are the manufacturer’s windows, and the 350 mm/s ceiling only holds if your printer and firmware can feed it. A Creality K1 series or Ender 3 V3 is the sort of hardware the tuning assumes; on an older machine the same filament prints, just slowly.

The flow improvement is the practical reason to choose this over a generic ABS spool: thin walls and small details come out cleaner at speed. Expect to dial in your own temperature and retraction settings, since ABS print quality depends as much on the machine as on the plastic.

Material properties

Impact strength 19 kJ/m², tensile strength 30.4 ± 0.6 MPa, bending strength 48.1 ± 0.2 MPa, and an 80°C heat distortion temperature. Creality markets these as roughly double standard PLA impact figures, which is the number that matters if you are printing brackets, housings, and clips that will be dropped.

Long-term degradation under UV without post-processing is not documented, and exact VOC output at the top of the temperature range is unknown. If a part will sit in sunlight or in a hot car, plan for painting or another surface treatment.

Ventilation, enclosure and storage

ABS off-gasses styrene while it melts. Print in an enclosure with a filtered exhaust, and keep the room aired out. Creality claims less warping even without a fully enclosed chamber, but standard ABS physics still favors enclosure plus ventilation.

Store the spool dry. ABS absorbs moisture from the air, so a dry box or sealed filament container keeps it printable between jobs.

The Creality US store lists $18.99 for the 1 kg black spool, against a $29.99 reference price. Abt Electronics lists $22.99. DigiKey, Best Buy, Adorama and B&H Photo Video also carry the black 1 kg Hyper ABS spool. Volume tiers on the manufacturer store start at 5+ rolls and go deeper at 10+.

Filament cost per kilogram sits between $18.99 and $22.99 depending on the store, and total running cost also includes electricity for the heated bed and hotend, which is minor next to the material itself.

Which model this is

This is the Creality Hyper Series ABS, 1.75mm, 1 kg spool, black, part number 3301020042. Do not mix it up with standard Creality ABS or with the PLA, PETG, PC and ASA versions of the Hyper line, which use different settings. The listing for this 1 kg black spool carries ASIN B0CF1YWR7P.

Sources

Manufacturer:

Independent reviews:

  • No independent instrumented test reports have been published for Hyper ABS.

Owner reports:

  • No owner forum reports are part of the research for this filament.

Stores and listings:

Buying guides for this category

Compare with

See also

Related products