Skip to content

Creality Hyper ABS 1.75mm 3D Printing Filament 1kg Black: problems, parts and running costs

Checked: 2026-11-09

Summary

Creality Hyper ABS is a high-speed ABS spool (up to 350 mm/s, hotend 230°C – 270°C, bed 75°C – 95°C) whose usual headaches are warping and layer adhesion on printers without an enclosed chamber, styrene fumes while printing, and moisture pickup during storage. The material itself costs $18.99 to $22.99 per kilogram depending on the store, and running it further costs mostly filament with heater electricity minor next to the plastic.

Common problems and fixes

Parts and consumables

Yearly running cost

Filament dominates: $18.99 to $22.99 per kilogram, so a year of use costs whatever volume you print (Creality store, Abt Electronics, November 2026). Electricity for the heated bed and hotend runs throughout a print but is minor next to the material, and no subscriptions or filters are involved. No owner reports on annual spending were found, so a yearly figure per user cannot be pinned down from the research.

When it is a good buy

At $18.99 per spool at the Creality US Official Store (November 2026) or $22.99 per spool at Abt Electronics (November 2026), this is worth buying when you need ABS strength on a fast enclosed printer and want the 350 mm/s flow behaviour. The same black 1 kg spool is also carried by DigiKey, Best Buy, Adorama and B&H Photo Video, so compare there before buying a second spool. Standard Creality ABS is the better choice on a slow open-frame printer, where the flow advantage cannot be used. Hyper PLA or Hyper PETG are the better choice for indoor prototypes and models that need no heat resistance. Hyper PC or Hyper ASA are the better choice for parts that must stay rigid above 80°C or sit outdoors.

Sources