Skip to content
Creality Hyper 1.75mm PLA 3D Printing Filament 1kg - Very Peri

Creality Hyper 1.75mm PLA 3D Printing Filament 1kg - Very Peri

By Creality · 3D Printers · 3D Printing · More from Creality

  • Price $19.99 USD (sale from $32.99)
  • 1.75mm filament diameter
  • 1kg (2.2lb) spool weight
  • Print speed up to 600mm/s
  • Diameter tolerance +/-0.03mm

Price not listed

Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.

Summary

A high-speed PLA filament on a 1 kg spool, sold by Creality in the Very Peri colorway and rated to 600 mm/s for its K1 and K2 printers. Check two things before buying: the speed rating only pays off on a fast printer, and owners report the spool often arrives damp, so budget for drying it.

Strengths

  • Sells at $19.99 a spool on Creality’s US store, down from a $32.99 list.
  • Bulk tiers take the price to $14.99 each at 20 or more.
  • Owners report clean, string-free prints once the spool is dried.
  • Rated toughness is above average for PLA, at 53 MPa tensile and 8.83 kJ/m2 impact.
  • Vacuum-sealed with desiccant and easy to print at 220-230 C.

Weaknesses

  • Owners report popping and stringing right out of the sealed bag.
  • Grey and red colorways draw repeated complaints while sibling colors print fine.
  • Mechanical spec numbers are manufacturer-sourced, not independently measured.
  • No independent instrumented test of this filament exists.
  • US and UK store pages display different warranty badges.

Verified specifications

MaterialPLA, formulated for good fluidity and fast curing.
Diameter1.75 mm with a claimed +/-0.03 mm tolerance.
Spool weight1 kg (2.2 lb).
Print speedrated up to 600 mm/s, with a working range of 30-600 mm/s (40-600 mm/s per the data sheet).
Print temperature190-230 C.
Bed temperature25-60 C.
Ambient temperature0-50 C.
Part cooling fan100%.
Density1.25 g/cm3.
Tensile strength53 MPa, X-Y (52.9 MPa on the RFID variant).
Elongation at break6.3%.
Bending strength92.38 MPa, X-Y.
Flexural modulus2490.18 MPa, X-Y.
Charpy impact strength8.83 kJ/m2, X-Y.
Packaging210 x 210 x 70 mm; 1.29 kg gross.
Spoolpaper in the standard version; the RFID plastic-spool version is a separate SKU.
Drying guidance4 hours at 50 C if moisture is suspected.
Full research notes and sources

Speed and who it is for

Hyper PLA is built around speed. Creality rates the 1.75 mm filament to 600 mm/s with fast cooling, and publishes a working range of 30-600 mm/s, which the data sheet narrows to 40-600 mm/s. That headline only matters on a printer that can approach it, such as Creality’s K1 or K2 machines; owners on a K1 SE report running it at about 300 mm/s with a 220 C hotend and a 55 C bed.

Moisture and colorway consistency

The most common owner complaint is moisture. Several owners report popping and stringing right out of the bag, usually fixed by drying; Creality recommends 4 hours at 50 C, and one owner printed a large shipping-container model in white that came out perfect after drying. A separate, colorway-specific signal is harder to explain: one owner’s grey Hyper PLA failed first-layer and third-layer adhesion across drying, glue and temperature changes while two white rolls from the same purchase were fine, and a K2 owner reported extruder gears chewing red filament with layer gaps. Another K2 SE owner traced stringing and wall cracking to residual PETG left in the nozzle after a material swap. These are caution signals from individual owners, not measured defect rates, and no Very Peri-specific complaints turned up.

Printing and care

The filament is a consumable, so the routine is drying and storage: keep the spool sealed with desiccant and dry it at 50 C for several hours if moisture is suspected. The standard version ships on a paper spool, which Creality does not recommend for its CFS multi-color boxes; the RFID plastic-spool version is sold separately for that. There are no user-serviceable parts, and a bad roll is handled through Creality’s 14-day return policy.

Is it worth it?

At $19.99 a spool the filament is a reasonable buy for owners of a Creality high-speed printer who want an inexpensive, tuned PLA. Creality’s US store lists the line at $19.99, down from $32.99, with tiers of $16.99 at five, $15.99 at ten and $14.99 at twenty. The RFID variant sells at B&H for $17.99, and Creality’s EU store lists the line at EUR 22.00 from EUR 32.99. At the $32.99 list price the value thins, and for a standard-speed printer a competing PLA+ at a similar price offers comparable tolerance without a speed rating you cannot use.

Which model this is

This page covers the standard paper-spool Creality Hyper Series PLA in the Very Peri color, 1.75 mm, 1 kg. It is not the Hyper PLA RFID plastic-spool version sold for Creality’s CFS multi-color printers, and not the Hyper PLA-CF, Hyper Rainbow, Stardust or Luminous variants. Do not merge owner reports from those lines into this one.

Sources

Manufacturer:

Independent reviews:

Owner reports:

Buying guides for this category

Compare with

Related products