Creality Hyper 1.75mm PLA 3D Printing Filament 1kg

Summary

A 1 kg, 1.75 mm PLA filament sold for high-speed printing up to 600 mm/s, in 15 colors, for owners of fast 3D printers. Check your printer’s real bed temperature before you buy: forum owners measured the bed surface 12-17 C below the set value with the side fan running.

Strengths

Marketed for high-speed printing up to 600 mm/s on fast 3D printers.
Sold in 15 colors, so matching a project color is easy.
Store price of $19.99 sits in the common PLA range, with tiered discounts.
RFID plastic-spool version exists for Creality’s CFS filament system.
Forum owners report smooth prints at 67 C bed temperature with no elephant’s foot.

Weaknesses

No independent instrumented test of this exact filament was found.
A K1 Max owner saw 90-degree corners tear at 220 C nozzle temperature.
Bed surface measured 12-17 C below the set temperature with the side fan running.
Print and bed temperature ranges are unverified outside the original listing.
Paper spools are not recommended for the CFS system.
Bulk packaging arrived crushed in one owner’s order of 10 spools.

Verified specifications

Material	PLA.
Diameter	1.75 mm.
Spool net weight	1 kg (2.2 lbs).
Designed print speed	up to 600 mm/s.
Volumetric flow (owner-reported)	~23 mm^3/s for Hyper PLA vs 25 mm^3/s for an Elegoo Rapid PLA+ alternative.
Color options on the standard store page	White, Black, Grey, Red, Blue, Green, Skin, Orange, Brown, Yellow, Purple, Peach Fuzz, Viva Magenta, Gold, Very Peri, plus a White2+Black2 bundle.
Spool type	paper spool for the standard version; RFID plastic spool for the CFS-compatible version.
Tiered store pricing	$16.99 each at 5 spools, $15.99 at 10, $14.99 at 20.
RFID spool	$21.00 sale price against $31.90 compare-at; tiered to $15.75 at 20 spools.
Single spool	$19.99 sale price against a $32.99 compare-at price (Creality US store, checked 2026-10-24).
Warranty and returns	“Up to 12-Month Warranty” and “14-Day Return & Refund” badges on the store page.
Tom’s Hardware reported a 10-spool deal at $8.63 per spool on 2026-07-29, plus $17.99 on eBay.

Full research notes and sources

High-speed claims and what is verified

Creality’s store page headlines “10x Faster, Precision & Toughness” and describes the filament as designed for print speeds up to 600 mm/s, with reduced warping, better fluidity at higher temperatures and faster cooling. None of those claims come with a test method or measured result. Tom’s Hardware’s article is a deal post, not a test, and its “Best Filaments for 3D Printing 2026” list does not include Creality Hyper PLA. The only measured data point in the fetched sources is an owner-reported volumetric flow of ~23 mm^3/s for Hyper PLA against 25 mm^3/s for an Elegoo Rapid PLA+ alternative.

Temperatures and calibration

The print-temperature range of 190-230 C and bed range of 25-60 C appear only in the original listing and were not found on Creality’s store page, so treat them as unverified. Forum owners report calibration difficulty instead. One K1 Max owner saw torn 90-degree corners at 220 C nozzle temperature, with no visible change across a 200-225 C temperature tower, while generic PLA produced sharp corners on the same printer. Another owner measured the bed surface roughly 12-17 C below the set value when the side fan ran, with prints lifting off the bed; printing at 67 C bed temperature gave smooth, flawless parts with no elephant’s foot. A third owner used the same Creality Print settings for Hyper PLA and regular PLA, 230 C nozzle and 55 C bed. One owner also reported an extruder dying shortly after calibration attempts, though that is a single report with no established cause.

Spool variants and compatibility

The store distinguishes two versions: a standard spool on paper and an RFID plastic spool for Creality’s CFS filament system. Paper spools are not recommended for CFS. The RFID version carries its own price and rating. Color naming also differs between sources: the store uses “Grey” while the original listing uses “Gray”.

At $19.99 on the Creality store, Hyper PLA sits in the common PLA range, with volume discounts down to $14.99 per spool at 20 units and a 10-spool deal reaching $8.63 per spool. Whether that is good value depends on unverified high-speed print quality and temperature behavior. Forum owners report calibration difficulty and bed-temperature measurement discrepancies that may affect consistency. With no independent tests and only limited owner discussion, no firm value threshold is defensible beyond the observed store and deal prices.

Which model this is

This page covers Creality Hyper Series PLA, 1 kg spool, 1.75 mm diameter, color “Grey/Gray”. No model number, SKU, MPN or ASIN was published in the sources checked, so match on the exact product name and choose between the paper spool (standard) and the RFID plastic spool (CFS). Do not confuse it with other Hyper Series materials such as Hyper PETG or Hyper ABS.