Creality Falcon 2W IR Laser Module
By Creality · 3D Printers · 3D Printing · More from Creality
- 2W optical power, 1064nm wavelength
- 0.03mm ultra-fine laser spot size
- Solid-state laser source
- Compatible with Falcon A1 Pro 20W
- Quick-swap modular design
Lowest price seen
$379.00
from $379.00 at Creality Falcon US · Checked Oct 24, 2026
- Creality Falcon US $379.00View at Creality Falcon US
- CrealityView at Creality
- eBayView at eBay
- AmazonView at Amazon (paid link)
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.
Summary
A quick-swap 2W infrared laser module that adds metal and plastic engraving to the Creality Falcon A1 Pro, using a 1064 nm solid-state laser with a 0.03 mm spot. Check compatibility and temperature before buying: it fits only the Falcon A1 Pro, and engraving quality falls outside 68-86°F (20-30°C).
Strengths
- Independent reviews report professional-quality metal marks on aluminum business cards and stainless steel jewelry, with no marking spray needed.
- The 0.03 mm spot gives crisp detail on small parts such as jewelry and serial numbers.
- It installs in under a minute via the quick-change system and engages more securely than the blue module.
- It marks metals and plastics that the included diode module cannot, including electroplated and dark acrylic surfaces.
- No marking spray or other recurring consumable cost is documented.
Weaknesses
- It is an accessory only: it requires the Falcon A1 Pro and is not compatible with other Creality lasers.
- It does not cut metal and is ineffective on wood, paper and most leathers, so the original diode module stays necessary.
- Manufacturer storefront prices differ sharply ($379.00 vs $499.00), and one reviewer estimates about $500 added to system cost.
- No instrumented test of optical power, wavelength or spot size, and no reliability or failure-rate data, was found.
- No module-specific warranty or repair parts information was found.
Verified specifications
| Product | Creality Falcon 2W Infrared Laser Module (A1 Pro); SKU 4007010224. |
|---|---|
| Laser source | solid-state. |
| Optical power | 2 W. |
| Wavelength | 1064 nm (1064+1 nm). |
| Spot size | 0.03 mm (0.03 × 0.03 mm). |
| Supported materials | gold, silver, brass, iron, aluminum, stainless steel, plastic, dark opaque acrylic, titanium alloy, electroplated metal, shale, ceramic coasters, and others. |
| Best working temperature | 68-86°F (20-30°C). |
| Compatibility | Falcon A1 Pro only. |
| Function | surface engraving and marking; not for cutting metal. |
| Not for organic materials | wood, paper, most leathers. |
| Design | quick-swap modular; installs in under one minute. |
| Dimensions, weight, and electrical input | not published by the manufacturer for this module. |
Full research notes and sources
Metal marking and temperature
The IR spot of 0.03 × 0.03 mm is visible under magnification and produces professional-quality results on aluminum business cards in 2-3 minutes per card, with consistent depth, and deep permanent marks on stainless steel jewelry. Optimal settings are reported around 100 mm/min at 80% power for most metal applications. The module performs best between 68°F and 86°F (20-30°C), with noticeable quality degradation outside that range; cold workshops will see worse results. The blue diode’s larger 0.08x0.10 mm spot is shown for comparison.
What it does and does not do
The module is surface engraving and marking only. It does not cut metal, and it is not effective on organic materials such as wood or paper, so the original diode module remains necessary for those. Owners report crisp, readable serial numbers on small aluminum parts and high-contrast marks on metals and plastics with no marking spray. A learning curve exists when dialing in power and speed for different plastics.
Cost and value
Manufacturer storefront prices differ: $379.00 on crealityfalcon.com and $499.00 on store.creality.com. One reviewer estimates the module adds about $500 to total system investment. At the lower price it is a reasonable add-on for users who need metal or plastic marking; at $499 or above it is a significant incremental cost against an unverified performance envelope. No marking spray or other recurring consumable cost is documented. Value depends on whether the buyer needs metal and plastic marking; users without that need should keep the included diode module.
Is it worth it?
Cold workshops also work against it.
Which model this is
This page covers the Creality Falcon 2W Infrared Laser Module (A1 Pro), SKU 4007010224, a quick-swap accessory for the Falcon A1 Pro only. Do not confuse it with the Creality Falcon 2 22W laser, the Falcon A1 Pro’s pre-installed 20W blue diode module, or third-party IR modules. ASIN B0FL1TFB6N.
Sources
Manufacturer:
Independent reviews:
Owner reports:
