Creality Ender Fast 1.75mm PLA 3D Printing Filament Pack 2KG - White+White: problems, parts and running costs

Checked: 2026-10-26

Summary

Ender Fast PLA is a budget high-fluidity filament whose main risk is consistency: owner reports include z-banding on an Ender 3 V3 KE and “horrible prints” after switching from Hyper Series on an Ender 3 S1 Pro, and Creality recommends drying it before use. Keeping it running costs little beyond the filament itself, about $30 a year at 2 kg of annual use at the October 2026 US store price. It is a good buy near $15/kg for users willing to dry and tune it; at the VIP price of $39.90 for 2 kg, compare it against better-documented alternatives.

Common problems and fixes

Z-banding / wobble on Ender 3 V3 KE — a Creality forum owner reports wobble with Ender Fast PLA while other filaments print cleanly; calibration did not resolve it. No confirmed fix; treat as a printer/filament interaction. Warranty terms vary by region (up to 12 months US, up to 24 months EU), but filament is sold as a consumable. [6][1][3]
Poor quality after switching from Hyper Series — an Ender 3 S1 Pro owner reports “horrible prints” after moving from Hyper Series to Fast Series PLA. Dry the filament and retune settings before concluding the spool is bad. [7][8][4]
Settings and quality troubleshooting — an April 2025 Reddit thread on r/Ender3V3SE shows owners working through settings for Ender Fast PLA. [12]
Moisture sensitivity — Creality Wiki recommends drying Ender Fast PLA before use; profile data lists 45 C for 4 h. Fix: dry before use and keep the spool dry during use. [8][4][5]
Uncertain spec provenance — temperature and mechanical figures come from a community profile site that attributes them to a Hyper Series PLA data sheet, not an Ender Fast-specific sheet; color entries disagree on bed range and softening point. No fix; treat the numbers as guidance to test. [4][5]
Achievable speed below the claim — one discussion cites Sprite Pro extruder flow around 11-15 mm^3/s, far below the 30 mm^3/s filament claim and the 300 mm/s product claim. Actual speed depends on printer and extruder. [7][4][5][9][10]

Parts and consumables

Ender Fast PLA filament (1 kg spool) — consumable; no part number published. US Creality store lists the 2 kg White+White pack at $29.99 (compare $39.99) in October 2026. Replace as needed; no published replacement interval. [1]
Drying and storage supplies — no proprietary parts; dry at 45 C for 4 h per profile data and store dry. Standard desiccant or a filament dryer. [4][5][8]
No replaceable printer parts — no replacement nozzle, hinge, or spool components are sold for this filament; it is a consumable. [1]

Yearly running cost

Not enough data for a measured annual spend. Filament is the only consumable; at the October 2026 US store price of $29.99 for 2 kg (about $15/kg) [1], 2 kg of annual use is about $30. Drying equipment and storage are optional. No subscriptions.

When it is a good buy

Price thresholds at other stores in October 2026: US Creality store lists $29.99 for the 2 kg White+White pack (compare $39.99), about $15/kg [1]; Creality VIP Mall lists $39.90 [2]; Creality EU store lists EUR 29.99 (compare EUR 42.99) [3]; Walmart lists a 2-pack White and White variant and a 1 kg white variant but checkout prices were not captured [9][10]. Under about $15/kg it is an inexpensive high-speed PLA worth testing for users who dry and tune it and whose printer can deliver the claimed flow. At the VIP price of $39.90 for 2 kg, compare against better-documented alternatives. Alternatives: Creality Hyper Series PLA when print quality consistency matters, since one owner reported worse results after switching away from it [7]; any PLA with manufacturer-published temperature and mechanical data when spec certainty matters [1][4][5].