Creality Ender-5 Max Epoxy Resin Build Plate
By Creality · 3D Printers · 3D Printing · More from Creality
- 430x415mm build surface
- Epoxy resin particle coating on spring steel
- Double-sided textured surface
- Compatible with Ender-5 Max
- High flatness with flexible demolding
Price not listed
- CrealityView at Creality
- eBayView at eBay
- AmazonView at Amazon (paid link)
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.
Summary
A spare or replacement flexible build plate for the Creality Ender-5 Max, sold by Creality at $27.71 with quantity discounts. Check before you buy: the Ender-5 Max already ships with an epoxy plate, and no independent test of this exact accessory exists.
Strengths
- Inexpensive spare plate sold directly by the manufacturer, with up to a 12-month warranty and a 14-day return window.
- Creality claims lower-temperature PLA adhesion (45 °C versus 60 °C) and bendability for part removal.
- Community owners report finer texture than stock PEI, strong adhesion, flexible sheets and usable coating on both sides.
- One K2 Plus owner reported better first-layer consistency after switching, attributed to higher flatness.
- Bulk pricing lowers the per-unit cost for print-farm use.
Weaknesses
- No independent instrumented test of this exact plate; the value case rests on manufacturer data and similar plates.
- The store page publishes no dimensions, weight, thickness or maximum bed temperature for the plate.
- Strong adhesion can make parts hard to remove; one owner advises against metal scrapers.
- Not all filaments stick, per one owner report.
- All community reports concern epoxy plates on other Creality printers, not this SKU.
- No exact-model owner feedback for this SKU was found.
Verified specifications
| Product | Ender-5 Max Epoxy Resin Build Plate. |
|---|---|
| Compatibility | Ender-5 Max, which has a 400 × 400 × 400 mm build volume. |
| Coating | epoxy resin particle coating on spring steel. |
| Surface | double-sided textured surface (product brief; the store page does not explicitly state double-sided). |
| Flexibility | bendable for part removal. |
| Adhesion temperature | 45 °C bed temperature for optimal PLA adhesion on the epoxy plate versus 60 °C on a PEI spring steel plate (Creality Lab data). |
| Printer heatbed | 1000 W, reaches 80 °C in 200 s, maximum 100 °C. |
| Printer leveling | 64-point auto leveling. |
| Warranty | up to 12 months, with a 14-day return and refund. |
| Dimensions | 430 × 415 mm (product brief; the store page does not publish dimensions). |
Full research notes and sources
Adhesion and temperature
Creality Lab data lists 45 °C as the bed temperature for optimal PLA adhesion on the epoxy plate versus 60 °C on a PEI spring steel plate. The Ender-5 Max heatbed is 1000 W, reaches 80 °C in 200 s and tops out at 100 °C. The 45 °C versus 60 °C figure is Creality Lab data, not an independent measurement, and the store page does not state a maximum bed temperature for the plate itself.
Owner experience with similar plates
No independent test of this exact plate was found. Community reports come from Creality forum owners of epoxy plates on other models: finer grain than stock PEI, very good adhesion that can be “almost too good”, flexible sheets that aid removal, identical coating on both sides, and a small Z-offset adjustment of about +0.04 mm for a flat plate. One owner reports that not all filaments stick. These reports concern the Ender-3 KE, K2 and K2 Plus, not the Ender-5 Max.
Is it worth it?
At $27.71 from the Creality store, with quantity discounts of $23.55 each for two, $22.17 each for four and $19.40 each for six, it is an inexpensive spare for a large-format printer. The plate is already included with the Ender-5 Max, so most owners only need it as a replacement. The value case rests on manufacturer claims and general community experience with similar plates rather than on independent testing.
Which model this is
This page covers the Creality Ender-5 Max Epoxy Resin Build Plate, a spare or replacement build plate for the Ender-5 Max. The store page publishes no model number, SKU or revision. The Amazon listing for this plate is ASIN B0DZ5GYLS2. Do not confuse it with the smaller Epoxy Resin Build Plate 310 × 315 mm sold for other printers.
Sources
Manufacturer:
- Ender-5 Max Epoxy Resin Build Plate — Creality Official Store
- Ender-5 Max 3D Printer — Creality Official
- Ender-5 Max Support — Creality Official
- Epoxy Resin Build Plate 310*315mm — Creality Official Store
Independent reviews:
- No independent reviews were retrieved.
Owner reports:
