Creality CR-Silk 1.75mm PLA Filament 1kg (Golden-silver): problems, parts and running costs

Checked: 2026-10-16

Summary

Owners report the same silk-PLA tuning trouble as the rest of the line: the gold-to-silver shift can come out weaker than expected, and under-extrusion and inconsistent shine appear at standard PLA settings. Silk PLA is also more brittle and drinks moisture faster than regular PLA, so a spool can fail partway if it is not dried. The only running cost is the filament itself, at $15.99 a roll on Creality’s US store in October 2026 (list $32.99); it is a reasonable buy for decorative prints at that price.

Common problems and fixes

The gold-to-silver shift can look weak — owners report the dual-colour effect may be less pronounced than expected at standard settings. Slow the print and raise the nozzle temperature to bring it out. [9]
Under-extrusion and inconsistent shine at stock PLA settings — the colour shift and gloss are sensitive to flow and temperature; the fix is per-colour calibration with a temperature tower, flow and pressure advance. [9]
Nozzle clogging — silk PLA clogs more often than standard PLA, especially at low nozzle temperatures or with heavy retraction. Print hotter and reduce retraction. [8]
Brittleness on thin parts — silk PLA is more brittle than standard PLA and can snap on thin printed parts. Use standard PLA for functional parts. [7]
Moisture absorption — silk PLA absorbs moisture faster than regular PLA and may need drying before a long print. Store it in a sealed container with desiccant. [10]

Parts and consumables

CR-Silk 1.75mm PLA 1kg spool, Golden-silver — $15.99 sale against a $32.99 list on Creality’s US store, October 2026. Creality packs 12 spools per 16.5kg carton and vacuum-seals the spool with desiccant; no other consumables are reported. [2][6]

Yearly running cost

The only running cost is the filament itself. Creality’s US store lists the Golden-silver variant at $15.99 (list $32.99) in October 2026, the standard CR-Silk line at $19.99 (list $28.99), and the EU store at €25.99 (list €36.99). Bulk discounts run from 15% off at 5+ rolls to 25% off at 20+ rolls. No owner data on annual roll usage was found.

When it is a good buy

At $15.99 or less, the Golden-silver variant is a reasonable choice for decorative prints where the look is the point.
Between $16 and $20/kg, compare it with other silk PLA options such as Amolen, eSun and Overture at similar prices.
Between $21 and $26/kg, it is weak value unless the specific dual-colour effect is wanted.
Above $26/kg, only buy it if you specifically want the silk finish and dual-colour shift and are ready for the extra calibration.
Alternative: standard PLA or PLA+ is the better choice for functional parts, because silk PLA is more brittle and needs extra calibration.