Creality CR-5 3D Printer
By Creality · 3D Printers · 3D Printing · More from Creality
- Build volume 300 x 225 x 380 mm
- Max extruder temp 250 C
- Layer height 100-400 um
- Max print speed 200 mm/s
- Nozzle 0.4 mm
Lowest price seen
$1,099.00
from $1,099.00 at Top3DShop · Checked Oct 24, 2026
- Top3DShop $1,099.00View at Top3DShop
- CrealityView at Creality
- eBayView at eBay
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.
Summary
A fully enclosed FDM printer with a 300 × 225 × 380 mm build volume and a hot end rated to 250 °C, sold in standard and high-temperature variants. Check the missing specifications before you buy: nozzle diameter, layer-height range, print speed, bed surface and power draw are not published, and no independent test of this model was found.
Strengths
- Fully enclosed build chamber with a metal frame.
- Build volume of 300 × 225 × 380 mm is generous for an enclosed printer.
- Hot end rated to 250 °C supports common engineering filaments.
- Filament detection and power-loss resume are included.
- Warranty of 12 months with a 14-day return window is stated.
Weaknesses
- Nozzle diameter, layer height, print speed, bed surface and power draw are not published.
- No independent instrumented test of this exact model was found.
- The difference between the standard and high-temperature variants is not documented.
- Only two short, unresolved owner forum reports exist, one about bed temperature.
- Price attribution between the two variants is uncertain on the archived store page.
Verified specifications
| Build volume | 300 × 225 × 380 mm. |
|---|---|
| Maximum printing (extruder) temperature | up to 250 °C. |
| Structure | metal frame with an enclosed build chamber. |
| Features | noiseless printing, filament detection, and resume printing after a power outage. |
| Variants | standard CR-5 Pro and CR-5 Pro (High-temp Version). |
| Warranty | 12 months, with a 14-day return and refund window, per the archived Creality store page. |
Full research notes and sources
What’s published and what isn’t
Creality’s current page publishes only the build volume and the 250 °C maximum printing temperature. The archived store page adds the metal frame, enclosed structure, noiseless printing, filament detection and power-loss resume. Nozzle diameter, layer-height range, maximum print speed, bed surface material, machine dimensions, weight, power requirements and included accessories are not stated on the fetched pages. If those matter to your workflow, confirm them with the seller before ordering.
Variants
Creality lists two entries, a standard CR-5 Pro and a CR-5 Pro (High-temp Version), but the fetched pages do not explain the hardware difference. One forum thread is filed under “CR-5 PRO H,” which may be the high-temperature variant, but it does not say so explicitly. Treat the two as unverified equivalents until Creality documents the difference.
Owner reports
Model-specific owner discussion is thin. One owner reports a CR-5 Pro bed that does not reach the requested temperature. Another reports that M117 text does not display on a CR-5 PRO H running firmware v0.06. Both are single, unresolved reports and do not support any estimate of how common the problems are.
Is it worth it?
At the $869.00 listed on Creality’s page, the CR-5 Pro is a mid-to-high-priced fully enclosed printer whose value rests on the published build volume and 250 °C hot-end rating. Without nozzle, layer-height, speed, bed surface, power and independent test data, the listing price is not fully validated. The unresolved bed-temperature report is a reason to ask questions before buying, not a reason to assume a defect.
Which model this is
This page covers the Creality CR-5 Pro, a fully enclosed FDM printer sold under that name, including the standard and the high-temperature variant. Do not confuse it with the non-Pro CR-5, the CR-5060 Pro, or the Ender-5 series.
Sources
Manufacturer:
Independent reviews:
- No independent instrumented review of this exact model was found in the sources checked.
Owner reports:
