Skip to content
Creality Aeroraise 3D Printed Sneakers（live exclusive） - Orange / 3.5M/5W

Creality Aeroraise 3D Printed Sneakers（live exclusive） - Orange / 3.5M/5W

By Creality · 3D Printers · 3D Printing · More from Creality

  • $149.46 (MSRP $159.00)
  • Heel Height: 4 cm
  • Average Weight: 664 g
  • Material: ELASTO 1000
  • Manufacturing: HALS 3D Printing (DLP-based)

Price not listed

Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.

Summary

A one-piece 3D-printed sneaker sold direct by Creality under both the Creality and Nexbie names, aimed at early adopters rather than runners. Check the fit and the return window before you buy: there are no independent tests and almost no owner reports yet.

Strengths

  • One-piece printed build means no glue lines or stitched seams that can split.
  • Waterproof construction and EU RoHS / US CP65 compliance are documented by a second retailer.
  • Four centimeters of heel and a printed lattice sole make it visually distinct.
  • Elastic slip-on entry suits quick trips without any lacing.
  • Sold direct by the manufacturer at $149.46, below the $159.00 list price.
  • Six colorways and thirteen sizes give you a decent chance of a fit.

Weaknesses

  • No independent tests and no genuine owner reports exist, so fit, comfort and durability are unproven.
  • The open lattice traps gravel and dirt, which Nexbie’s own guide warns about.
  • One-piece resin construction leaves no user-serviceable parts and no spare-parts channel.
  • Made to order with a 5–14 day shipping estimate, then only a 14-day return window.
  • Warranty terms differ by store (12, 24 or 3 months), and no footwear document reconciles them.
  • The “live exclusive” label is defined nowhere, and the EU store already runs it as final clearance.

Verified specifications

ModelAeroraise 3D Printed Sneakers, “live exclusive” listing; also sold as “Aeroraise 3D Printed Sneakers”.
Colorway and sizeOrange, US 3.5M / 5W; variant 53103964586349.
Constructionone-piece molded build, printed with HALS (DLP-based) 3D printing, with a 3D-printed lattice.
MaterialELASTO 1000, a recyclable elastomeric resin.
Heelabout 4 cm.
Weight664 g average per shoe.
Water resistancewaterproof, breathable construction.
ComplianceEU RoHS and US CP65.
ColorwaysOrange, Purple, White, Black, Green and Pink.
SizesUS 3.5M / 5W through US 12.5M / 14W, 13 steps.
Closureelastic slip-on, no traditional laces.
Carerinse the smooth surface under a showerhead or hose; Nexbie also calls it machine-washable.
Package dimensionsEU44 / US10 325 × 125 × 130 mm, 0.77 kg; EU47 / US13 340 × 125 × 130 mm, 0.94 kg; shipping weight 1.2 kg.
MPNs1511030135 (Orange, EU44 / US10), 1511030088 (Black, EU47 / US13), 1511030109 (Black, EU44).
Warrantyup to 12 months on the US store, up to 24 months on the EU store, 3 months return-to-base at PB Tech.
Full research notes and sources

Which model this is

The Aeroraise is a consumer sneaker from Creality, the 3D-printer maker, and the same shoe also sells under the Nexbie label, a footwear brand that started inside Creality. The Orange “live exclusive” listing is what this page covers, in US men’s 3.5 / women’s 5. Creality’s own store, the EU store, Best Buy (sold and shipped by Creality) and Nexbie’s site all carry it. Retailer part numbers vary by color and size: 1511030135 for Orange EU44, 1511030088 and 1511030109 for Black.

Fit and sizing

Nexbie publishes the only fit guidance: the shoe is true to size, and size up only if you sit between two sizes. That claim comes from the brand, not from wearers. The elastic slip-on closure means there are no laces to tighten, so you cannot dial in the fit the way you can with a lace-up. Best Buy’s size run for the Nexbie pair starts at US 5M / 6.5W, while Creality’s store lists thirteen steps from US 3.5M / 5W to US 12.5M / 14W. Returns are the only real test here.

Construction, care and durability

The shoe is printed in one piece from ELASTO 1000, Creality’s elastomeric resin, and PB Tech’s spec table backs the molded DLP build, the waterproof finish and the RoHS / CP65 compliance. There are no glue joints, stitches or removable parts, so there is nothing to repair at home and no spare parts to order. Care is limited to rinsing the smooth surface with water; Nexbie says it is machine-washable, but no other source repeats that. How the resin handles a year of pavement, and how fast the lattice sole wears, are unknown because nobody has measured them.

Creality’s live-exclusive Orange pair is listed at $149.46 against a $159.00 list price, and the standard Creality listing shows $159.00 against a $228.99 reference. Best Buy sells the Nexbie-branded pair at $159.99; Nexbie’s own site shows $159.00 against a $229.00 list; the EU store marks it €159.00 from €199.00 as final clearance, with some White sizes sold out. PB Tech in New Zealand lists the Orange pair at NZD $225.22 plus GST, down from $259.00. One Instagram post mentions a $99 pair tied to a Creality anniversary event, which looks like a giveaway rather than a shelf price. There are no consumables or running costs beyond ordinary wear.

Is it worth it?

This is an early-adopter buy. The technology story, the Creality name and the printed-lattice look are the draw; a proven track record is not part of the deal yet. At the live-exclusive $149.46 the 14-day return window is the main safety net, and the 5–14 day production lead time means you wait before you find out. If you want a shoe for daily mileage with published durability, wait for owner reports or independent tests before spending.

Sources

Manufacturer:

Brand and trade coverage:

Retailers:

Owner reports:

Buying guides for this category

Compare with

Related products