Skip to content
Creality Aeriscape Casual 3D Printed Sneakers - Gray / 12.5M/14W

Creality Aeriscape Casual 3D Printed Sneakers - Gray / 12.5M/14W

By Creality · 3D Printers · 3D Printing · More from Creality

  • ELASTO 1000 TPU material
  • HALS 3D Printing DLP-based process
  • 360-degree breathable airflow
  • Hydrophobic fast-dry coating
  • Approximately 290g weight

Price not listed

Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.

Summary

A one-piece, lace-free slip-on sneaker from Nexbie, Creality’s footwear brand, printed from an elastomer called ELASTO 1000 in an open lattice for airflow and drainage. Sizing is the recurring complaint across the Nexbie line, so confirm your fit inside the return window before you commit.

Strengths

  • One-piece printed construction means no glued seams or stitching to come apart.
  • Open lattice upper is built for airflow and quick drainage in hot or wet conditions.
  • Hydrophobic fast-dry surface and machine washability suit rinse-and-wear use.
  • Lace-free slip-on design with adaptive lattice fit; Nexbie says size up between sizes.
  • Generous 30-day Nexbie return window cuts the risk of a bad fit (14 days through the Creality store).

Weaknesses

  • No independent test of this exact model exists; every performance claim comes from Nexbie or Creality.
  • Sizing inconsistency is the recurring complaint across Nexbie’s sibling models, with snug toe boxes reported.
  • No published dimensions or weight, so fit and heft cannot be checked against the spec sheet.
  • A printed open upper trades solid-upper protection and insulation for airflow, and Nexbie positions it for casual wear, not sport.
  • Whether insoles ship in the box is unstated; Nexbie sells separate 3D-printed insoles at $49.99.
  • Return window differs by store (14 days Creality vs 30 days Nexbie), so confirm which applies at checkout.

Verified specifications

ModelAeriscape Casual 3D Printed Sneakers (US store); Aeriscape 3D Printed Sneakers (EU store).
BrandNexbie, Creality’s footwear brand.
MaterialELASTO 1000, a polyurethane-based elastomer that Nexbie describes as a 53% bio-based recyclable polymer.
ProcessHALS 3D printing, a DLP-based system; the shoe is a single printed part with no glued seams or stitching.
Closureslip-on, lace-free.
Fit guidanceadaptive 3D lattice fit, true to size; size up if between sizes.
CertificationsEU Reach and US CP65.
Colorsblack, gray and white.
EU sizes offered35–47.
Airflowopen lattice, marketed as 360-degree ventilation.
Surfacehydrophobic, fast-drying.
Caremachine washable per Nexbie.
Dimensions and weightnone published by Creality or Nexbie.
Full research notes and sources

Fit, sizing and the return window

Fit is the thing to get right. Nexbie’s guidance is adaptive lattice fit, true to size, size up between sizes, and the caution signs come from review widgets on Nexbie’s sibling models (Leisure Path, Cloud Slippers), not from this shoe: reviewers describe sizing inconsistencies and snug toe boxes. No exact-model owner thread was found. Because returns differ by channel, buy where you can test the fit inside the window and send them back if they do not work. That is the practical way to handle a first-generation model with no independent fit data.

Airflow, drying and materials

Nexbie prints the whole upper as an open lattice it markets as 360-degree ventilation, with a hydrophobic, fast-drying surface and quick drainage; the shoe is also sold as machine washable. Those are manufacturer descriptions, and no measured airflow, drainage-rate or drying-time data was found. Nexbie’s comparison copy for the sibling Aeroraise claims its ventilation design increases airflow by over 80% versus a solid shoe, but that is a vendor figure without a published method and it is not for the Aeriscape. The payoff of the open upper is breathability; the trade-off is less solid-upper protection and support, and Nexbie positions the Aeriscape as casual and standing wear rather than sport.

What is and is not independent

There is no independent test of the exact Aeriscape. The 3D-printed-shoe coverage that exists from CNET, The Verge and PCMag covers Adidas, Nike, Syntilay and Zellerfeld products, not Nexbie. The review counters on Nexbie’s pages are first-party widgets from different regional storefronts, so read them as brand-level signals, not exact-model evidence.

Is it worth it?

At the $139.00 US sale price against a $199.00–$199.99 reference, the Aeriscape is fair only for a buyer who specifically wants the printed one-piece build, airflow and quick-dry behaviour and will use the return window to confirm fit. At or above the $199 reference it weakens, because the same material and process run across Nexbie’s line and this exact model has no independent test history. The room to compare includes the Adidas Climacool, a different 3D-printed design at about $150. Optional 3D-printed orthotic insoles add $49.99 if you want arch support.

Which model this is

This page covers the Aeriscape Casual 3D Printed Sneakers in Gray, size 12.5M/14W, sold in the Creality US store and as the plain Aeriscape 3D Printed Sneakers in the EU store. Creality sells its footwear under the Nexbie brand. Do not confuse it with Nexbie’s sibling models, including Aeroraise, Cloud Spark, Leisure Path, Braidge, AeroCloud and Guardian Orbit, which share the material and process but are different shoes.

Sources

Manufacturer:

Independent reviews:

  • No test of the exact Aeriscape model was found.

Related coverage:

Owner reports:

Parts and stores:

Buying guides for this category

Compare with

Related products