Skip to content
Creality 3D Printer Build Plate Adhesive Glue

Creality 3D Printer Build Plate Adhesive Glue

By Creality · 3D Printing Accessories & Scanners · 3D Printing · More from Creality

  • 80 ml capacity
  • 143 x 35 x 35 mm package
  • 120 g gross weight

Price not listed

New
Used, refurbished, open-box

Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.

Summary

An 80 mL liquid adhesive for FDM heated build plates, sold for PLA, PETG, ABS and ASA, meant to improve first-layer grip or act as a release layer on smooth PEI. Check plate and filament compatibility first: a clean, well-calibrated textured PEI plate often needs no adhesive at all, and glue cannot fix a bad first layer.

Strengths

  • 80 mL is more material than common smaller glue sticks, and liquid can spread more evenly when applied correctly.
  • Can serve two roles: improving first-layer grip and acting as a release layer for PETG on smooth PEI.
  • Traceable part number (4008060429) agreed across the Creality VIP catalog and multiple European sellers.
  • US procurement is possible through resellers, including an eBay listing at $21.92 with shipping and import fees included.

Weaknesses

  • No independent instrumented adhesion or durability test exists for this exact bottle.
  • Glue cannot fix poor calibration, dirty or oily plates, wrong Z offset, wet filament or bad bed temperature.
  • On smooth PEI, glue can act as a release agent and reduce grip rather than increase it.
  • Film buildup or too-thick application can leave ridges or residue on the part underside.
  • US manufacturer-direct retail checkout could not be confirmed in the checked sources.

Verified specifications

ProductCreality 3D Printing Build Plate Adhesive Glue, manufacturer item 4008060429.
EAN/GTIN6977905744046.
Volume80 mL liquid adhesive in one container.
Packaging143 × 35 × 35 mm, 120 g gross per the Creality VIP listing; another distributor quotes 144 × 36 × 36 mm and 113 g gross.
Useheated FDM build plates, with claims for PLA, PETG, ABS, ASA and other materials on compatible surfaces.
Applicationthin even layer on a clean, dry surface; allow to set before printing; let the plate cool before removing the part.
Compositionno manufacturer SDS or full formulation for this exact liquid SKU was found; do not assume it shares chemistry with the solid glue stick.
No electrical load, firmware or mechanical service life; efficacy depends on plate, filament and first-layer conditions.
Full research notes and sources

Adhesion and release

An adhesive can help when corners lift on an otherwise correctly prepared compatible plate, and a release barrier can protect smooth PEI from overly strong PETG bonding. Prusa recommends a separation layer or a different sheet for PETG on smooth PEI. Claims of zero warping, no residue and universal compatibility are marketing, not measured performance. Do not use it on plates whose manufacturer specifies a different or prohibited coating.

Application and cleanup

Apply a thin even layer over the planned model footprint on a clean, dry, cool-enough surface and let it set before printing. Let the build plate cool before removing the part, since prying off a large hot print can damage a plate despite adhesive use. Cleanup is water and soap per dealer marketing, but this is not a certified specification for this part. Reapply only when the film is consumed, dried or contaminated; no manufacturer-provided replacement schedule or prints-per-bottle figure exists.

Observed offers on October 25, 2026: Creality VIP trade reference $15.25 (dealer pricing, not a verified shopper checkout); eBay US-facing listing at $21.92 with shipping and import fees included, from a Japan-based seller away until November 1, 2026; TorqueHouse $27.98 and TinyRacer $28.20 (unconfirmed at checkout); Creality UK £5.90 sold out; Noto3D Poland 39 PLN; Bastelgarage Switzerland CHF14.90. At $21.92 for 80 mL the unit cost is $0.274 per mL. A good delivered buy target is $18-$20 for a verified genuine bottle, $20-$24 if liquid application is specifically desired, and above $25 alternatives such as Bambu Lab 60 mL liquid glue at $16.99 or Magigoo Original 50 mL at about $24.95 deserve comparison. There is no electricity, subscription or hardware cost; if a coated plate already works without glue, the most economical recurring spend is $0.

Support and warranty

Creality US terms place gluesticks and other disposable items under “Consumable Parts — No warranty.” The exact liquid code 4008060429 is not listed individually, so classify it as a consumable by analogy and confirm coverage with the seller. General Creality US terms allow 14-calendar-day returns for qualifying items and 30-day accessory exchanges for manufacturing or shipping defects with documentation; opened or used liquid cannot be assumed eligible as resellable stock. The eBay offer states no returns, with platform purchase protection subject to its own rules. Contact cs@creality.com for direct-order claims, retaining order number and photos.

Is it worth it?

At a verified delivered price under $21.92, this is a reasonable consumable for owners whose PLA, PETG, ABS or ASA projects repeatedly lift on a compatible plate, or who need a separation layer to keep PETG from bonding too strongly to smooth PEI. If the problem is actually first-layer setup rather than missing glue, the bottle adds an unnecessary step and cost. Above $25, compare Bambu Lab 60 mL at $16.99 and Magigoo Original 50 mL at about $24.95, accounting for shipping and surface compatibility.

Which model this is

This page covers the Creality 3D Printer Build Plate Adhesive Glue, 80 mL, manufacturer item 4008060429, EAN 6977905744046. It is not the 21 g Creality solid PVP Glue Stick, the 3-item Creality Accessories Pack, or a resin printer adhesive. The packaging is 143 × 35 × 35 mm, 120 g gross per the Creality VIP listing.

Sources

Manufacturer:

Independent reviews and guides:

Owner reports:

Parts and stores:

Buying guides for this category

Compare with

See also

Related products