Creality 3D Printer Build Plate Adhesive Glue (80 mL): problems, parts and running costs

Checked: 2026-10-25

Summary

An 80 mL liquid adhesive for FDM heated build plates, sold for PLA, PETG, ABS and ASA, that can improve first-layer grip or act as a release layer on smooth PEI. It cannot fix a bad first layer, may reduce grip on smooth PEI, and can leave film buildup; if a coated plate already works without glue, the most economical recurring spend is $0. At a verified delivered price under $21.92 it is a reasonable consumable for owners who need grip or release; above $25, compare Bambu Lab 60 mL at $16.99 and Magigoo Original 50 mL at about $24.95.

Common problems and fixes

Does not fix a bad first layer — glue cannot correct a high Z offset, dirty or oily plate, wrong first-layer flow, incorrect bed temperature, wet filament or a drafty enclosure. [11] [6]
Can reduce grip on smooth PEI — on smooth PEI glue can act as a release agent; a September 2026 owner reported glue made prints stick less well on a surface that otherwise worked. [7] [5]
PETG can pull plate coating without a release layer — a 2025 owner showed loss of a Creality K1 plate coating when removing PETG; Prusa warns about this risk with PETG on smooth PEI. Use a suitable release coating or another plate and let it cool. [5] [12]
Film buildup and residue — a too-thick or repeatedly reapplied layer can leave ridges or residue on the part underside; Prusa warns about excessive film imprinting. [5] [6]
No independent long-term owner data for this SKU — no identified owner tracked this exact liquid for a defined number of prints; broad forums discuss glue in general rather than this bottle. [1] [2] [4] [7]
Dried or contaminated applicator — the cap and dispenser must stay clean and closed; no measured service life or clogging statistics were found. [1] [2]

Parts and consumables

Creality Build Plate Adhesive Glue 80 mL (4008060429) — the whole bottle is the consumable; factory trade reference $15.25; one US-facing import offer $21.92 delivered; EAN 6977905744046. Replace when consumed, dried or contaminated; no manufacturer prints-per-bottle figure exists. [1] [2] [10]
Creality Glue Stick for Build Plate (21 g) — solid coating alternative at $8.09 selected U.S. direct-store price. [15]
Water, mild dish soap and lint-free cloth — generic materials for cleaning approved removable print sheets. [5] [6]
Magigoo Original 50 mL — different adhesive at $24.95. [16]

Yearly running cost

No electricity, firmware, subscription or hardware cost. At the $21.92 imported price, one bottle a year is $21.92, two is $43.84 and four is $87.68; these are purchasing assumptions, not measured replacement intervals. At $21.92 for 80 mL the unit cost is $0.274 per mL. If a coated plate already works without glue, recurring spend can be $0. [1] [10]

When it is a good buy

Creality VIP trade reference: $15.25 on October 25, 2026, labeled dealer pricing, not a verified regular shopper checkout. [1]
US-facing eBay offer: $21.92 with shipping and import fees included, from a Japan-based seller away until November 1, 2026, with no seller returns. [10]
TorqueHouse listed $27.98 and TinyRacer $28.20, both unconfirmed at checkout. [17] [18]
Creality UK official store: £5.90, sold out, UK-only stock. [3]
European references: Noto3D Poland at 39 PLN; Bastelgarage Switzerland at CHF14.90. [2] [4]
Good buy target: $18 to $20 delivered for a verified genuine 80 mL bottle; $20 to $24 if liquid application is specifically desired; above $25 compare Bambu Lab 60 mL liquid glue at $16.99 and Magigoo Original 50 mL at about $24.95. [9] [10] [16]
Named alternatives: Bambu Lab Liquid Glue for Build Plate 60 mL at $16.99, which publishes a 100 full-plate coatings claim; Creality Glue Stick for Build Plate 21 g at $8.09; Magigoo Original 50 mL at $24.95. [9] [15] [16] [19]