Craftsman V20 MAX CMCK200C2: problems, parts and running costs

Checked: 2026-10-17

Summary

The CMCK200C2 two-tool kit’s recurring problems are V20 battery and charger failures, including dead-on-arrival packs and chargers that will not take a charge, and a drill that stalls on large spade bits; both tools use brushed motors. Running costs are limited to replacement batteries, a failed charger and worn bits, and no prices for those parts were published in the sources checked. The kit is a solid homeowner value at the $99 deal price posted on 2026-10-12, but weak at its $169 regular retail next to brushless kits with more power.

Common problems and fixes

Batteries arrive dead or chargers will not charge — multiple r/Craftsman threads report a fully charged V20 battery that will not work on a new kit and a charger and battery that will not take a charge, with one commenter calling the included charger “garbage”. These are anecdotes rather than defect rates; the 3-year limited warranty covers the kit and each tool. [11][12][1]
Battery drains faster than expected under load — ToolGuyd’s 2018 hands-on test of the identical CMCD700 drill found the included 1.3 Ah pack depleted quicker than anticipated when the drill was pushed to its limits. [4]
Drill stalls on large bits — the same test rated the drill average for power and speed and documented two stalls on a 1-1/2-in. spade bit through a 2x4. [4]
Battery capacity labeling conflict — the kit title says 1.5Ah packs while CRAFTSMAN’s individual tool pages say 1.3Ah, so listings alone cannot tell you which pack ships; check the physical pack on the box. [1][2][3]
No hammer mode — the CMCD700 is a drill/driver only, so masonry work needs a separate V20 hammer drill such as the CMCD711 or CMCD712. [14]

Parts and consumables

Chucks, switches, motors — parts availability beyond battery and charger swaps was not found on the manufacturer pages checked. [1]

Yearly running cost

Not enough data. The recurring items are a replacement battery when one ages or fails, a charger swap if the included unit fails, and bits as they wear, and none of these has a published replacement interval. [1][4][12]

When it is a good buy

$100 or less — solid homeowner value: two brushed tools with a 3-year warranty, two batteries, a charger and a bag, on a battery platform shared with CRAFTSMAN’s outdoor equipment; a deal post on 2026-10-12 reported the kit at $99 against a $169 reference. [8]
$101-130 — fair; the kit still undercuts brushless kits, but the brushed motors’ shorter runtime matters more.
$131-169 — weak to fair; at the $169 regular retail at Farm and Fleet or $169.99 at McCoy’s, you pay near brushless-kit money for 280 UWO and 1,460 in-lbs tools, and the warranty plus the two included batteries are the main offsets. [9][10]
Above $169 — poor value unless you already own V20 packs and want the shared ecosystem.

Alternatives:

CRAFTSMAN V20 brushless RP CMCD713 kit — listed at $129 as a kit by Pro Tool Reviews; the same-brand step up from this brushed kit. [6]
V20 hammer drills (CMCD711, CMCD712) — the better choice when masonry work is the main job. [14]