Anycubic Resin Vat
By Anycubic · 3D Printing Accessories & Scanners · 3D Printing · More from Anycubic
- 449 g (Mono 4 variant)
- 261×173.5×72 mm (Mono 4 variant)
- FEP film (Mono 4 variant)
- 390-2280 g weight range across variants
- Extra lid included to block dust/UV/sunlight
Lowest price seen
$89.99
from $89.99 at Anycubic US · Checked Oct 23, 2026
- Anycubic US $89.99View at Anycubic US
- AnycubicView at Anycubic
- eBayView at eBay
- AmazonView at Amazon (paid link)
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.
Summary
A model-specific replacement resin tank for Anycubic Photon resin 3D printers, sold with FEP, ACF or NFEP release film already fitted. Check your printer model and film type before ordering: the vat is not universal, and the wrong variant will not fit.
Strengths
- Model-specific variants cover the Photon lineup from Mono 2 to M7 Pro.
- Release film (FEP, ACF or NFEP) comes pre-installed, so no manual film fitting.
- Manufacturer publishes per-variant weights and dimensions.
- Replacement guide on the Anycubic Wiki; support available for installation help.
Weaknesses
- Short 3-month warranty on separately purchased accessories.
- No independent leak or dimensional-fit testing was found for this accessory.
- The “extra lid” claim is unverified; the P1 Max spec lists no resin vat cover.
- Model and film mismatch risk if the wrong variant is ordered.
- No verified owner discussions of this exact accessory were retrieved.
Verified specifications
| Product | replacement resin vat for Anycubic Photon series resin 3D printers. |
|---|---|
| Variant selection | by compatible printer model. |
| Pre-installed release film | FEP, ACF, or NFEP depending on variant. |
| Compatible models | Photon P1 Max, Photon P1, Photon Mono M7 Max, Photon Mono M7 Pro, Photon Mono M7, Photon Mono 4 Ultra, Photon Mono M5s Series, Photon Mono M5 Series, Photon Mono 4 Series, Photon Mono 2, Photon Mono X Series, Photon M3 Max, Photon M3 Plus, Photon Mono SE, Photon Mono, Photon, Photon S, Photon Mono 4K, Photon Ultra, Photon D2. |
| Mono 2 variant | 390 g; 261x173x70 mm; FEP film. |
| Mono 4 variant | 449 g; 261x173.5x72 mm; FEP film (standard) or ACF film (Mono 4 Ultra). |
| Mono 4 Ultra variant | 449 g; 261x173.5x72 mm; ACF film. |
| Mono M7 variant | 960 g; 364x231x76 mm; ACF film; no heating function. |
| M5/M5s variants | 1079 g; 320x220x74 mm; ACF or NFEP film. |
| P1 variant | 1101 g; 345x284x83 mm; ACF film; smart heating resin. |
| P1 Max variant | 1600 g; 415x372x95 mm; NFEP film; smart heating resin; no resin vat cover. |
| M7 Max variant | 1709 g; 435x313x83 mm; ACF film; smart heating resin. |
| M7 Pro variant | 2280 g; 353x323x180 mm; ACF film; smart heating resin. |
| Weight range across variants | 390 g to 2280 g. |
| Warranty | most separately purchased accessories carry a 3-month warranty; period may vary. |
| Replacement guide | Anycubic Wiki parts and accessories. |
| Manufacturer direct price shown | $89.99 (Anycubic, 2026-10-23). |
Full research notes and sources
Choosing the right variant
The accessory is model-specific, so the main purchase risk is selecting the wrong variant or film type for the printer. Confirm the compatible model before ordering, and match the film type (FEP, ACF or NFEP) to the printer’s requirements. The manufacturer lists two Mono 4 rows, one with ACF film and one with FEP film, so check which applies.
Film types and upkeep
Film type differs by variant: NFEP on P1 Max/P1, ACF on the M7 series, Mono 4 Ultra and M5/M5s, and FEP on the Mono 4 Series and Mono 2. Replacement film must match. The vat is a consumable and the film is replaceable, with separate FEP/ACF/NFEP film products sold. Routine care means keeping the film clean and avoiding sharp tools on the surface.
Warranty and running costs
Most separately purchased accessories carry a 3-month warranty; the period may vary, and the refund policy page was not verified. Running costs are replacement release film, resin and cleaning supplies. No price trend data was available from the sources read.
Which model this is
This page covers the Anycubic Resin Vat replacement accessory, ASIN B0H9L1TRMM, sold in model-specific variants. There is no single model number; the variant is defined by the compatible printer model and the pre-installed release film type. Do not confuse it with printer-specific tanks sold under different part numbers by third parties.
Sources
Manufacturer:
- Anycubic US store — Resin Vat
- Anycubic global store — Resin Vat
- Anycubic — Refund & Warranty policy
- Anycubic — Shipping policy
- Anycubic Wiki — Parts & Accessories replacement
Independent reviews:
- No independent reviews found.
Owner reports:
- No owner reports found.
