ANYCUBIC Multicolor PLA
By ANYCUBIC · Filament & Resin · 3D Printing · More from ANYCUBIC
- 1.75mm diameter
- +/-0.02mm tolerance
- 1kg/roll (10-roll bundle)
- 340m length per roll
- Nozzle 200-210C
Price not listed
- ANYCUBICView at ANYCUBIC
- eBayView at eBay
- AmazonView at Amazon (paid link)
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
Stores are listed in a fixed order, never by price or commission. Prices are snapshots. Check the current price with the store.
Summary
ANYCUBIC Multicolor PLA is a 10 kg, 10-color 1.75 mm PLA bundle for high-volume hobbyists, print farms, educators and ACE Pro owners. Check your feeding setup before you buy: crossed winds, slightly oversized spool shoulders and stiff material can snag in automated multi-color switchers such as the Bambu Lab AMS and Creality CFS.
Strengths
- Exceptional per-kilogram value for a 10-color starter palette.
- Smooth layer fusion and minimal stringing on standalone direct extruders.
- Deep, consistent color saturation on standard non-white hues.
- Reliable first-layer adhesion on thoroughly cleaned textured PEI plates.
- Built-in smart identification support for ANYCUBIC ACE Pro units.
- Neat spool winding with no crossing turns; clog-free, bubble-free material.
Weaknesses
- Frequent spool winding overlaps cause snagging and failed long prints.
- Slightly wide spool shoulders trigger clearance and retraction errors in third-party hubs and automated feeders.
- White filament shows rough diameter spots and higher clog frequency.
- Stiff polymer composition resists repeated mechanical retraction cycles, producing false tangle alerts.
- Some spools may arrive with compromised vacuum seals and need drying.
- No manufacturer spec sheet for the multicolor bundle; store pages lack printable nozzle and bed tables.
Verified specifications
| Material | PLA (polylactic acid), biodegradable, low odor. |
|---|---|
| Diameter | 1.75 mm. |
| Net weight | 1 kg per spool, 10 kg total. |
| Length | about 340 m per spool. |
| Colors | black, white, texture grey, clear, red, blue, green, orange, yellow, purple (10). |
| Bed temperature | 50-80 C; owner feedback centers on 55-60 C on thoroughly cleaned textured PEI; a community profile recommends 55 C. |
| Tensile strength | at least 55 MPa. |
| Hardness | 81D. |
| Bubble content | none. |
| Identification chips | compatible with ANYCUBIC ACE Pro for automatic type/color/profile detection; inert on printers without ACE Pro. |
| Max volumetric flow | about 11.62 mm3/s per a community profile. |
| Spools | rigid plastic, vacuum-packed with desiccant. |
| Spool flange | slightly wider than competing brands, which can rub inside tight automated dry-boxes. |
| Spool dimensions (standard single spool) | 1 kg filament plus 0.35 kg spool; 60 mm height, 75 mm inner diameter, 200 mm outer diameter. Whether the bundle spools share these exact dimensions is not verified. |
| Drying | dry at 45 C for 4-6 hours if a vacuum seal is popped or the filament is wet. |
| Shelf life | 12-18 months unopened reported for an ANYCUBIC 10 kg PLA bundle; not verified for the multicolor bundle specifically. |
Full research notes and sources
Print temperatures and bed adhesion
Owner feedback centers bed adhesion at 55-60 C on thoroughly cleaned textured PEI. Drying before first use is recommended by multiple sources despite vacuum packaging. ANYCUBIC’s own store pages for this bundle contain no printable spec table, so treat the temperature ranges as third-party guidance, not manufacturer data.
Feeding in automated switchers
The bundle’s main liability is mechanical feeding. Owners report crossed winds that snag mid-print, spool shoulders that rub in tight feeders, and a polymer stiff enough to resist the repeated retractions that automated switchers impose. The white spool is the outlier, with rough diameter spots and more frequent clogs than the companion colors. None of this disqualifies the bundle for open, direct-drive printing, but it does make unassisted multi-color switching a gamble. Rigid plastic spools avoid dust shedding in enclosed feeders, and the flange is slightly wider than competing brands, which can rub inside tight automated dry-boxes.
Drying, storage and shelf life
Filament is a consumable with no repair path. Keep spools dry; dry at 45 C for 4-6 hours if a vacuum seal is popped or the filament is wet. Vacuum-sealed packaging with desiccant arrives on most spools, but some may arrive with compromised seals. Shelf life of 12-18 months unopened is reported for an ANYCUBIC 10 kg PLA bundle; it is not verified for the multicolor bundle specifically. No warranty or return terms for this filament were found in the sources read.
Value and ownership cost
Value is the bundle’s clear strength. It sits in a $130-150 bulk tier by one aggregation, and as low as about $8.90 per kg by another listing that may be a glow-in-the-dark variant. Bundles of this type typically save 10-30% per kg versus buying the same spools individually. At roughly $15 per kg or less (about $150 or less for 10 kg), the bundle is strong value for single-extrusion workhorses, print farms, educators and ACE Pro owners. At $10-15 per kg it remains a good buy for direct-drive users who monitor spools. Value drops for users expecting unassisted multi-color switching. The ACE Pro chip integration is a differentiator only for ANYCUBIC ACE Pro owners; for everyone else it is inert. Compared with premium brands sold by the kilogram, the bundle’s per-kg price is far lower; the trade-off is batch-to-batch and color-to-color consistency, especially the white spool.
Which model this is
This page covers the 10-color, 10 kg ANYCUBIC Multicolor PLA bundle: black, white, texture grey, clear, red, blue, green, orange, yellow and purple, at 1.75 mm, with an intelligent identification chip on each spool for the ANYCUBIC ACE Pro multi-material system. The chips are inert on printers without ACE Pro. It is a consumable filament, not a numbered model; do not confuse it with single-color ANYCUBIC PLA, PLA+, PETG, silk or glow-in-the-dark bundles. The Amazon listing for this bundle is ASIN B0F2SH32F3.
Sources
Manufacturer:
- ANYCUBIC filament pack (US store)
- ANYCUBIC filament pack (global store)
- ANYCUBIC 1.75mm PLA filament (US store)
- ANYCUBIC filament performance comparison
Independent reviews:
Owner reports:
- No dedicated owner threads were found; owner evidence here comes through third-party review aggregation.
