
All American 1930 Pressure Cooker/Canner (921)
By All American · Pressure Cookers · Kitchen & Cooking
Compare all Pressure Cookers side by side →
The short version
✓ Why people buy it: The metal-to-metal lid seal removes the need for a replaceable rubber perimeter gasket.
✗ Watch out for: The lid can be difficult to seal or remove at first; new metal-to-metal seals can leak some steam until they bed in, and a vacuum can hold the lid if the regulator is left on after pressure reaches zero.
Prices at 7 stores ↓ · Will it fit? Size check ↓ · All 5 catches ↓
- 21.5-quart liquid capacity
- 17.75-pound empty weight
- 12.25-inch inside diameter
- 5, 10, and 15 psi pressure settings
- 26 half-pint, 18 pint, or 7 quart jars
Lowest price seen
$449.95
from $449.95 at AllAmericanCanner.com · Checked Nov 10, 2026
- AllAmericanCanner.com $449.95View at AllAmericanCanner.com
- AliExpress Shop1104467175 Store $538.59View at AliExpress
- AllView at All
- AllAmericanCooker.comView at AllAmericanCooker.com
- AmazonView at Amazon (paid link)
More on eBay (1)
- eBayView at eBay
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
Stores with a price are sorted lowest first; commission never changes the order. Prices are snapshots. Check the current price with the store.
Summary
The All American 1930 Model 921 is a 21.5-quart cast-aluminum stovetop pressure canner and cooker with a metal-to-metal lid seal instead of a replaceable rubber gasket. It suits regular home canners who want a no-gasket design and can handle its weight, wide base, and manual venting and clamping routine.
Size in context
31.1 cm · 12.2 in (W) × 31.1 cm · 12.2 in (D) × 39.1 cm · 15.4 in (H) · Drawn to scale from the maker's stated dimensions, next to everyday objects.
Strengths
- The metal-to-metal lid seal removes the need for a replaceable rubber perimeter gasket.
- It holds up to seven quart jars or 18 regular-mouth pints with two included racks for layered small jars when the process allows.
- The weighted regulator provides 5, 10, and 15 psi settings and does not require calibration testing when used with the vent pipe.
- Replacement parts are sold directly by the manufacturer, including the overpressure plug, gauge, regulator, vent pipe, rack, and wing-nut hardware.
- A 2026 owner report in r/Canning described a first 921 run maintaining 10 psi with less intervention than an older Presto 16-quart canner.
Weaknesses
- The lid can be difficult to seal or remove at first; new metal-to-metal seals can leak some steam until they bed in, and a vacuum can hold the lid if the regulator is left on after pressure reaches zero.
- The six wing-nut assemblies and even tightening routine take more time and care than a twist-lock lid.
- It is heavy and wide, with a 15-3/8-inch exterior bottom that may not suit every cooktop or storage space.
- The pressure dial and overpressure plug still need ongoing attention; the manufacturer recommends yearly replacement of both the #2040 plug and #72 gauge.
- It is not induction-compatible, and glass-top use depends on the specific stove’s load and burner rules.
Verified specifications
| Model | All American 1930 Model 921; produced by Wisconsin Aluminum Foundry in the United States. |
|---|---|
| Capacity | 21.5 US quarts liquid capacity. |
| Materials | heavy cast-aluminum vessel and lid with a hand-fitted, beveled metal-to-metal seal; no rubber perimeter sealing gasket. |
| Pressure control | #68 weighted regulator on #69 vent pipe with 5, 10, and 15 psi settings, #72 dial pressure gauge, and replaceable #2040 overpressure plug. |
| Jar capacity (manufacturer, current listing): 26 regular-mouth half-pints or 16 wide-mouth half-pints, 18 regular-mouth pints or 16 wide-mouth pints, or 7 quart jars (older materials and some dealers report 19 regular-mouth pints; jar shape affects fit). | |
| Included | vessel and lid, two #151 racks, 5/10/15 regulator weight, steam gauge, and printed instructions/recipes booklet. |
| Overall height | 15.375 in (manufacturer listing and authorized dealer). |
| Inside diameter | 12.25 in; inside height: 10.5 in (authorized dealer). |
| Bottom exterior diameter | 15.375 in; bottom thickness: approximately 3/8 in (authorized dealer). |
| Weight | manufacturer lists 22 lb in the product specification and 17.75 lb in comparison text; an authorized dealer lists approximately 24 lb empty. |
| Cooktop compatibility | manufacturer lists gas, indoor electric-coil, and flat/glass-top compatibility for the 921 but excludes induction; stove manufacturer approval for load, bottom geometry, and burner footprint is required. |
| Use | pressure canning of low-acid foods with tested procedures adjusted for food, jar size, and altitude; USDA/NCHFP requires 10 minutes of continuous venting before placing the regulator and pressurizing. |
Full research notes and sources
Capacity, sealing, and daily use
The 921 is sized for household canning batches: the manufacturer lists capacity for 7 quart jars or 18 regular-mouth pints, while older materials and some dealers list 19 regular-mouth pints. Jar shape changes what fits, so a cold dry-fit with racks is the practical way to confirm your jars.
Instead of a rubber gasket, the lid and rim meet as a machined metal-to-metal seal. That avoids gasket replacement, but the lid still needs clean mating surfaces, even wing-nut tightening in opposite pairs, and light lubrication where the manual specifies. Manufacturer guidance notes that a new seal can leak a little steam until it beds in, and that leaving the regulator on after pressure returns to zero can create a vacuum that holds the lid.
Stove fit and handling
The canner’s exterior bottom measures 15.375 inches and the empty weight is reported between about 17.75 and 24 pounds depending on source. Once filled with jars and water, the load on a cooktop is much higher. The manufacturer states compatibility with gas, indoor electric-coil, and flat/glass-top stoves for the 921 but excludes induction and defers to the stove manufacturer’s limits on load, bottom geometry, and burner footprint.
Heat-up and cool-down take time with a thick 21.5-quart aluminum vessel. After processing, you need to let pressure drop naturally; the manual warns against force-cooling or opening a pressurized lid.
Safety, parts, and running costs
The 921 uses a weighted regulator for 5, 10, and 15 psi, a dial gauge, and a replaceable overpressure plug. USDA/NCHFP guidance requires 10 minutes of continuous venting before pressurizing, and low-acid foods must be processed with tested recipes adjusted for food, jar size, and altitude. The manufacturer’s Canning Hub recommends yearly replacement of the #2040 overpressure plug ($4.95 direct, November 2026) and the #72 dial steam gauge ($24.95 direct, November 2026), and the plug must be replaced immediately if it deploys.
Other replaceable parts sold by the manufacturer include the #68 regulator ($19.95), #69 vent pipe ($19.95), #151 rack ($14.95 each), #64 wing nut ($9.95 each), and a pressure canner repair kit ($84.95). Canning lids are separate consumables: Ball 12-count regular-mouth flat lids were listed at $3.99 at Target in November 2026 (about $0.33 per jar), and flat lids are used once per processed batch.
There is no measured energy-per-batch figure for this exact model across stove types and recipes. As an example, following the manufacturer’s annual plug and gauge recommendation plus 180 flat lids at $3.99 per 12-count pack would total $89.75 in parts and lids before heat, water, ingredients, jars, taxes, and shipping.
The silver 921 was listed at $449.95 at Pleasant Hill Grain and Red Hill General Store in November 2026, with availability varying by listing and cart. The manufacturer listed colored 921 finishes at $499.95 and a cosmetically blemished factory-outlet 921 at $409.96 (out of stock, final sale except functional defects) in sampled listings. For comparison, the Presto 23-quart 01781 was listed at $185.99 direct from Presto and $189.99 at Ace Hardware in November 2026.
For qualifying household canners purchased on or after September 1, 2024, the manufacturer advertises a lifetime limited warranty to the original purchaser, but it excludes the pressure gauge, overpressure plug, wing nuts, clamp bolts, pins, and racks. A separate older return/refund page still states a one-year warranty, so keep your receipt and confirm terms for your purchase.
Which model this is
This is the All American 1930 Model 921, a 21.5-quart stovetop pressure canner/cooker (ASIN B0002808Z2). It is not an electric multi-cooker, not a commercial sterilizer, and not induction-compatible.
Sources
Manufacturer:
- All American 1930 Model 921 product page
- All American 1930 pressure cooker/canner instructions (2022 manual PDF)
- All American 1930 replacement parts catalogue
- All American 1930 Canning Hub maintenance guidance
- All American 1930 cleaning, maintenance, and storage guide
- All American 1930 pressure canner repair kit
- All American 1930 lifetime limited warranty
- All American 1930 return and refund policy page
- All American 1930 pressure canner lineup
Independent reviews:
- Pleasant Hill Grain: All American 921 listing
- Red Hill General Store: All American 21.5-quart pressure canner listing
- All American 1930 factory outlet 921 listing
- Eartheasy: All American 921 listing
- Presto 23-quart pressure canner 01781 product page
- Target: Ball regular mouth canning lids listing
- National Center for Home Food Preservation: using pressure canners
- National Center for Home Food Preservation: recommended canners
Owner reports:








