ADATA SD820 2TB: problems, parts and running costs
Checked: 2026-11-11
Summary
The ADATA SD820 2TB suffers from thermal throttling after about twelve minutes of heavy use, with read speeds dropping to ~940 MB/s and write speeds cycling to 55–70 MB/s. Yearly running cost is minimal at just electricity usage. Good value under $213 for users needing a rugged, portable SSD with 20 Gbps burst speeds.
Common problems and fixes
- Thermal throttling — after about twelve minutes of sustained reads and writes, the drive throttles with reads dropping to ~940 MB/s and writes cycling to 55–70 MB/s until the drive rests; occurs due to limited cooling in the sealed, rubberized body [2][7].
- Slow sustained writes after cache fills — once the SLC cache is exhausted, writes average about 115 MB/s, which is slower than a good hard drive; the QLC-style cache provides ~400 GB of fast writes at ~1,190 MB/s on the 2TB model [2][7].
- Cache recovery on exFAT — after filling and emptying an exFAT drive, the large cache does not return until the drive is reformatted; using NTFS avoids this issue as Windows sends TRIM commands on NTFS volumes [2][7].
- No AES hardware encryption — the drive lacks hardware-based encryption, so data would be vulnerable if the drive is lost or stolen unless external encryption (e.g., BitLocker) is used [3][4].
- Cable not waterproof — the included USB-C cable lacks end caps and is not waterproof, limiting full IP68 protection in wet environments even when the port plug is closed [4][7].
Parts and consumables
- USB-C cable (included) — included with the drive; not waterproof and lacks end caps [4][7]. No replaceable parts or consumables reported.
Yearly running cost
Not enough data. The drive uses DC 5 V, 900 mA from USB port during operation [2], but no specific electricity cost calculations are available in the sources.
When it is a good buy
Under $213 at Target (Nov 2025) [4]. Good value for users needing a small, rugged, fast external SSD with burst speeds and IP68/MIL-STD ratings, and who can use a 20 Gbps port. For long sustained writes or if you prefer TLC flash and better cooling, alternatives with different flash types and heatsinks may be preferable.